Overclock.net banner

1 - 4 of 4 Posts

·
Registered
Joined
·
247 Posts
Discussion Starter #1
So when testing to see how hig I could get my reference clock today, I was able to get it to 275 with a Ht link of 2750 and my dram feq at 458, When I went any higher windows didnt load so I tried lowering the ht feq and that didnt work, so i tried lowering the ht feq as well as the dram feq.

Is this the max I am going to get or am I doing this wrong. I didnt adjust the voltage because I cant find the stock voltage anywhere or the max voltage for the board
 

·
Registered
Joined
·
90 Posts
Could you help me? I have the same board and can not get a reference clock over 250. I tried lowering the HT frequency but I still couldn't get past my wall at 250. I was thinking about trying a bios update because im several revisions behind.
 

·
Registered
Joined
·
1,098 Posts
If testing for max ref clock you need to lower everything to minimum, ram, ht, all multi's, etc.

As for the HT, anything over 2000MHz is pretty much useless. Theres some charts around here somewhere that showed pretty drastic decreases in performance over 2000.
 
1 - 4 of 4 Posts
Top