Originally Posted by Zackcy  1. you change your voltage in the BIOS under Jumperfree configuration I believe. 2. x8 is more then enough for a 580. Will look into to that. 3. My default your RAM clocks are as low as possible. For DDR3 it's 1333mhz and CL9. If you mean by CPU-Z, it doesn't show the 1333mhz clock, it says something like 600 I think, but that isn't your actual clock speed. It should be the top left corner under the memory tab (CPU-Z) for correct speed. EDIT: You have other cards in your expansion slots? Couple pics of CPU-Z would really help. |
Originally Posted by Smoblikat i only have an HD5850, and either way i paid for x16 so i want x16 isnt there somthing i have to do to make it go in x16? Im not talking bout CPU-z i mean in the BIOS if i try to overclock the RAM it has weird speeds like 1500 1300 900 1800, i was hoping it would be like 1066 1333 1600 1866 2000 2133 and some in the middle, no other cards plugged in but my HD5850 |
Originally Posted by Zackcy That's weird. By default it should be x16. I'm stumped, sorry. There is a menu in the BIOS for changing that, but I forgot what it's called. Also, once again, by default it should be x16. Were did you see x8 again? Did you change your base clock? My mobo goes like 1333-1600-1800, and with my 1055t @ 3.7 ghz it goes like 1512-17xx-19xx. Cpu clock: [Base clock x CPU multiplier]= CPU frequency Memory: [Base clock x Memory mulitiplier]= RAM speed. My base clock is like 286 mhz or something. |
