Overclock.net banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
51,319 Posts
Take control of the Vid and Vid Special % for a more constant vcore!
Vid x Vid% for the voltage setting after start up!
Shoot for mid 1.5ish to start.
 

· Premium Member
Joined
·
51,319 Posts
1. Disable Cool N Quiet.
2. With good enough cooling don't wory about the voltage relative to loads.
3. THe VID Control x VID Spec%
1.35x113%=1.525
Start there and watch the full load temp and keep below 50c
Work the VIDxVID% up from there.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top