Overclock.net banner

ATTENTION: P5N-E Owners Old&New

253 Views 7 Replies 4 Participants Last post by  thunder12
Hey guys, if you have EVER owned a P5N-E board, or still do...

Please list here what you are running for:
  • CPU Cooling
  • Memory
  • NB Heatsink
  • SB Heatsink
And please list any complications you have with any of them installing, with SLI, etc.

I will be adding all this data to the P5N-E sticky thread in this forum.
I have a decently extensive list right now, but I know there is a lot more out there.

ALSO: If you wish to have you verified overclock on the P5N-E, please leave me a direct link to your CPUZ verification and I will add you to post #3 in the P5N-E sticky thread.

Thank you much in advance!
The P5N-E'ers thank you as well!

-dpawl31
1 - 8 of 8 Posts
P5N-E SLI (obviously)

BIOS: 1101

two different CPU's I've used in it:

e7200 @ 3.8ghz (400FSB)
Vcore: 1.15V /w +100mV
Memory: 2.2V
NB: 1.5XX V

e6400 @ 3.2ghz (400FSB)
Vcore 1.26 /w +100mV
Memory: 2.2V
NB: 1.5XX V

Memory: OCZ Platinum rev.2 @ 800mhz /w 4-4-4-12
SB heatsink: Bare
NB heatsink: HR-05 SLI
CPU cooling: Big Typhoon /w stock fan

Complications:
Refuses to like above 400 FSB, regardless of multiplier, voltages, tweaking, and ram timings I could never get it stable over ~410 FSB on either processor.
Had a second HR-05 SLI on the SB, but had to remove it since I couldn't fit two graphics cards in it along with the SB cooler.
See less See more
2
Quote:


Originally Posted by pheoxs
View Post

P5N-E SLI (obviously)

BIOS: 1101

two different CPU's I've used in it:

e7200 @ 3.8ghz (400FSB)
Vcore: 1.15V /w +100mV
Memory: 2.2V
NB: 1.5XX V

e6400 @ 3.2ghz (400FSB)
Vcore 1.26 /w +100mV
Memory: 2.2V
NB: 1.5XX V

Memory: OCZ Platinum rev.2 @ 800mhz /w 4-4-4-12
SB heatsink: Bare
NB heatsink: HR-05 SLI
CPU cooling: Big Typhoon /w stock fan

Complications:
Refuses to like above 400 FSB, regardless of multiplier, voltages, tweaking, and ram timings I could never get it stable over ~410 FSB on either processor.
Had a second HR-05 SLI on the SB, but had to remove it since I couldn't fit two graphics cards in it along with the SB cooler.

The big typhoon is the only new thing on there I can use, everything else you have is listed.
Also - if you wish to have your overclock with either CPU there listed, I need a CPUZ verification page or I can not list it.
Thanks for the BT info
See less See more
CPU Cooling: Thermaltake V1, Zalman CNPS9700
Memory: (Did not use 3rd party heatsinks) Have run Crucial Ballistix / Corsairs / OCZ
NB Heatsink: HR-05
SB: That blue Zalman already listed (makes it non-SLI)
Hey Blizzie.
Will add the V1 when I get a minute here at work.
9700 Zalman is already there, thank you.
Same with HR-05 and Zalman on SB.
Thanks again. Oh, and do you want to have a CPUZ verified post on the front page? If so, let me know. I just need the link.
Oh- and were the corsairs and OCZ memory the ones I have listed now?
If not, do you remember what they were?
2
Quote:


Originally Posted by dpawl31
View Post

Hey Blizzie.
Will add the V1 when I get a minute here at work.
9700 Zalman is already there, thank you.
Same with HR-05 and Zalman on SB.
Thanks again. Oh, and do you want to have a CPUZ verified post on the front page? If so, let me know. I just need the link.
Oh- and were the corsairs and OCZ memory the ones I have listed now?
If not, do you remember what they were?

Yup. OCZ Gold and Corsair XMS2.

I'm not fond of my overclock, so no front page.
See less See more
lol... ok then!
See less See more
http://www.ec.kingston.com/ecom/conf...submit1=Search

all this ram is compatible with P5N-e, using 3gb of the CL6 stuff right now, its just standard stuff.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top