Overclock.net banner

1 - 20 of 495 Posts

·
Registered
Joined
·
3,003 Posts
Discussion Starter · #1 ·


Info
While Azza may not be as large of a brand name as NZXT, Cooler Master, etc; they do produce a variety of cases that look great and are excellent quality. In fact they are the only manufacturer I have seen thus far to have a removable motherboard tray that can be configured in either ATX or R-ATX. I know I can't be the only owner out there on OCN, so come on ya'll and post some pictures and get a small community going. This would also provide a good centralized place for anyone looking for ideas or answers about the cases.

Member list
yutzybrian - Genesis 9000B - sold
solar0987 - Solano 1000
InitialDriveGTR - Genesis 9000W
Ecks9T - Genesis 9000B
socketus - Genesis 9000B
DarkHollow - Genesis 9000B
gdesmo - Fusion 4000
Going Mod - Genesis 9000W
BlackIce05 - Genesis 9000B
Korayyy - Solano 1000R
zski320 - Genesis 9000B
sakmeo95 - Genesis 9000B
Jump3r - Genesis 9000B
KONA604 - Genesis 9000B
Tmzasz - Genesis 9000W
TripleTurbo - Genesis 9000W
UNDEADFRIEND - Genesis 9000W
rolandwally83 - Venuz VC701B - (Genesis 9000B)
Sno - Azza Fusion 4000
atled - Genesis 9000W
GeneralKrispy - Genesis 9000W
sporkotica - Genesis 9000W - BUILD LOG
rasa92re - Genesis 9000W
Lionheart1980 - Genesis 9000W - BUILD LOG
Castscythe - Genesis 9000B
RayTheRat - Genesis 9000B
jadepol - Genesis 9000B
ThisisSataaa - Genesis 9000B
fleks - Genesis 9000W
Elmy - Genesis 9000W
Jayrrus - Genesis 9000W - BUILD LOG
i2eal7ired - Genesis 9000B
hat1324 - Azza Z or CSAZ-103 mini-itx

Extra venting in top, credits to DarkHollow!
Link
 

·
Registered
Joined
·
1,574 Posts
Pictures of mine

My entire setup
IMG_1258.jpg


Love this fan controller, little pricey for only 4 channels but at 50W a channel I can run more than one fan off each channel
IMG_1259.jpg


Kinda orange but looks alright with the build
IMG_1256.jpg


IMG_1263.jpg

IMG_1195.jpg

IMG_1211.jpg


Modding front bay cover for temperature display
IMG_1214.jpg

IMG_1216.jpg


Bottom is inlet, top is for fillport, and side to pump. The fitting with the wire is a temperature sensor
IMG_1219.jpg


Handy place for a dual pump setup. Mounted with velcro
IMG_1220.jpg


The liquid tube ports fit a fill port perfect. Score!
IMG_1229.jpg


Fill 'er up
IMG_1235.jpg


IMG_1238.jpg

IMG_1243.jpg
 

·
11
Joined
·
2,844 Posts
Beautiful case! What is the temperature monitoring display you have toward the bottom of your case? Is that for your GPU?

So you're not using the stock fan controls then, I see. Any reason for that? Do the stock fan buttons only control the LEDs for you now?

If you don't mind, could you also measure the height of the case along the front edge of the top cover? The top curves down on both sides (front and back), and I would like to see how much room it will have under my desk at the very front.
 

·
Registered
Joined
·
3,186 Posts
I so wanted that case but i don't know.

I currently have a azza case modded of course in my buildlog
biggrin.gif


I agree there nice cases!
 

·
11
Joined
·
2,844 Posts
Also, I'm thinking it'd be cool to have an L-shaped window modded in the vented side door, within the protruding square area around the large [screened?] cutout. I don't even know where I'd begin though, as I've never cut metal at home before (once in a machine shop elsewhere).
 

·
Registered
Joined
·
1,574 Posts
Quote:
Originally Posted by ElevenEleven View Post

Beautiful case! What is the temperature monitoring display you have toward the bottom of your case? Is that for your GPU?
It's a FrozenCPU water temperature monitor. It has a fitting that is hooked into my 5-way adapter to monitor the water temperature of the loop. Its only about 12F above room temp at the moment (yes I run in Fahrenheit
tongue.gif
)

http://www.frozencpu.com/products/10996/tmp-53/FrozenCPUcom_Custom_Thermal-Star_Bitspower_Liquid_Cooling_Temp_Probe_Display.html?tl=g30c101s457
Quote:
So you're not using the stock fan controls then, I see. Any reason for that? Do the stock fan buttons only control the LEDs for you now?
Correct, I prefer more precise control of the fans (plus I was using more than the built in controller handles). The button pretty much turns the case lights on and off now
Quote:
If you don't mind, could you also measure the height of the case along the front edge of the top cover? The top curves down on both sides (front and back), and I would like to see how much room it will have under my desk at the very front.
It measures 26" at its highest point (about center) and is 25" in the very front
Quote:
Also, I'm thinking it'd be cool to have an L-shaped window modded in the vented side door, within the protruding square area around the large [screened?] cutout. I don't even know where I'd begin though, as I've never cut metal at home before (once in a machine shop elsewhere).
Dremel, drill, masking tape, rivets, and rivet gun. Pretty basic stuff when it comes to window mods
 

·
Registered
Joined
·
3,186 Posts
Pics
thumb.gif

Still got some work to do but it has to wait till after the foldathon And inc frozen q tvirus ress
biggrin.gif
ordering it fri!

450

700

700

700

700

700

700

700
 

·
Registered
Joined
·
3,186 Posts
Quote:
Originally Posted by yutzybrian View Post

Very nice. What temps are your Ivy going at? Also I just noticed we have the exact same dual pump setup lol
Heres temps folding on gpu and cpu


at 1.488/1.496 it fluctuates at 4.7
The high temps are when i shut my fans off also
tongue.gif


And im prolly gonna buy another one and get the tripple block when i get a new case!
 
1 - 20 of 495 Posts
Top