Joined
·
3,422 Posts
Hi OCN
I have a slight problem i set my Timing in BIOS to 9-9-9-24 but when entering Windows my Timings revert back to 7-9-9-24
please see below BIOS Setting
Code:
Any Help OCN
Memory = OCZ OCZ3P16004GK 4GB PC3-12800+ (DDR3-1600+) 7-7-7
I have a slight problem i set my Timing in BIOS to 9-9-9-24 but when entering Windows my Timings revert back to 7-9-9-24
please see below BIOS Setting
Code:
Code:
Advanced Frequency Settings
CPU Clock Ratio...........[x22]
QPI Clock Ratio..........................[x36]
Standard Clock Control
Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[200]
System Memory Multiplier (SPD)...........[x8]
Memory Frequency (MHz).....................[1600]
PCI Express Frequency (MHz)..............[100]
Advanced Clock Control
CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps ]
PCH Clock Skew...........................[ 0ps ]
Advanced Memory Settings
System Memory Multiplier (SPD)...........[ x8 ]
Memory Frequency (MHz)....................1600
Performance Enhance (SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]
Channel A & B
Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[9] in BIOS - [7] in Windows
tRCD....................................[9]
tRP.....................................[9]
tRAS...................................[24]
>>>>> Advanced Timing Control
tRC....................................[33]
tRRD...................................[4]
tWTR...................................[5]
tWR....................................[10]
tWTP...................................[22]
tWL....................................[8]
tRFC...................................[76]
tRTP...................................[5]
tFAW...................................[20]
Command Rate (CMD)......................[ 1T ]
Static tRD......................................[12]
Advanced Voltage Settings
>>> CPU
Load Line Calibration....................[Enabled]
CPU Vcore..................1.19375v......[1.375v]
QPI/VTT Voltage............1.100v........[1.31v]
>>> MCH/ICH
PCH Core....................1.050v.....[1.12v]
CPU PLL......................1.800v.....[1.800v]
>>> DRAM
DRAM Voltage..............1.500v.....[1.64v]
DRAM Termination.........0.750v.....[Normal]
Ch-A Data VRef............0.750v.....[Normal]
Ch-A Data VRef............0.750v.....[Normal]
Ch-B Data VRef............0.750v.....[Normal]
Ch-B Data VRef............0.750v.....[Normal]
Advanced Core Features
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Enabled]
CPU Enhanced Halt (C1E)..................[Disabled]
C3/C6/C7 State Support...................[Disabled]
CPU Thermal Monitor......................[Disabled]
CPU EIST Function........................[Disabled]
Bi-Directional PROCHOT...................[Auto]Memory = OCZ OCZ3P16004GK 4GB PC3-12800+ (DDR3-1600+) 7-7-7
