[lightsource]

Ok. So... I updated my bios of my computer. From 1002, to 1009. I forgot the settings that I had in my bios before, but I KNOW that it had nothing to do with the DDR voltage... Now, with that known. I would like to know why the hell is my memory at 184.9MHz. instead of the 226MHz that it was at before I updated my bios. also before on CPU-Z it showed that (under Timings) my FSB

RAM was at CPU/9.0, but not it is at CPU/11.0. Please if someone knows my problem. Please explain.

 

[DigitalPhreak]

Your settings reverted back to their default settings after you flashed so you need to go in and change your FSB back to what you had it and change your Cpu multi back to 9. Your Cpu multi is defaulted at 11.

 

[YiffyGriffy]

That's a 939 3000, default CPU multi is x9. What happened is the system chose a different memory divider (probably because you're running single channel RAM) and you need to set it back to 200MHz (400MHz DDR).

 

[DigitalPhreak]

Oops I was thinking of SKT 754.

 

[lightsource]

Well. How exactly do I do that? I might end up just doing the Asus Overclock settings and stuff.