Overclock.net banner

8081 - 8100 of 8122 Posts

·
Registered
Joined
·
105 Posts
Hello, one of my friends is interested in buying my Gskill F4 2666 C15 (4x8Gb) ram which I have long kept overclocked at 2933 with timing as per the attached image.
Which 4x8Gb ram do you suggest as an alternative? I'd like to try to ddr4 3200 with fairly tight timings; the Kingston 3200 C15 HX432C16PB3K4/32 or 3333 C16 HX433C16PB3K4/32 are a good choice?


Inviato dal mio LYA-L29 utilizzando Tapatalk
 

·
Overclocker in training
Joined
·
14,315 Posts
Hello, one of my friends is interested in buying my Gskill F4 2666 C15 (4x8Gb) ram which I have long kept overclocked at 2933 with timing as per the attached image.
Which 4x8Gb ram do you suggest as an alternative? I'd like to try to ddr4 3200 with fairly tight timings; the Kingston 3200 C15 HX432C16PB3K4/32 or 3333 C16 HX433C16PB3K4/32 are a good choice?


Inviato dal mio LYA-L29 utilizzando Tapatalk
Hi,
3200C14

https://benzhaomin.github.io/bdiefinder/

You're in luck not too badly priced was 270.us though
https://www.newegg.com/g-skill-32gb-288-pin-ddr4-sdram/p/N82E16820232348
 

·
PC Gamer at Call of Duty
Joined
·
856 Posts
Set "Phase Control" to Optimized, you need direct contact VRM liquid cooling for Extreme. Should be under the DIGI+ settings in the BIOS. Best way to check if it is a faulty sensor is to use an IR thermometer on the VRM heatsinks. Make sure power duty control is set to "T.Probe" as well. Check the attachments.

Messing about with VRM settings in AiSuite can cause these issues as well; uninstall AiSuite if you have it installed, before doing all this.
Many thanks for that, the Phase control was on Auto so I've set it to optimized. Not a huge difference tho;

I do not use AI suite, so that's not an issue. I'll dig out the IR Thermometer and check the VRM's with that. I do get this warning message when I open HWInfo, should I be concerned or it the Asus EC something which could cause abnormal readings?
 

Attachments

·
Overclocker in training
Joined
·
14,315 Posts
Hi,
I just use sensors only but yes I do check the box and continue.
VRM is excluded if you exclude the sensor I believe.
 

·
PC Gamer at Call of Duty
Joined
·
856 Posts

·
Overclocker in training
Joined
·
14,315 Posts

·
More Vcore
Joined
·
1,576 Posts
You would have to define the duty cycle your CPU goes through to compare. Using the 6950X for typical 24/7 HEDT tasks like rendering, compression and encryption may be an entirely different workload to your own, always important to mention how the CPU is being used with any quoted voltages.
Typical work day for my 6950x at 1.35v/4.3ghz.

1. Plex transcoding for my family to 2-3 devices. DVR mostly.
2. Work in Adobe Premiere, Photoshop, After Effects
3. Gaming
4. Running two VMs for work.

I won't say it is at max boost clock 24/7, but it gets a good workout pretty regulary. I think it is also important to take into account cooling. Mine is cooled with a EK monoblock on a custom loop. Temps are usually in the mid 40s to low 50s.

My chip was also purchased used from ICC-USA's ebay store. They advertise "overclocked" hosted solutions. No idea to what level it was OC'd, but my chip also saw server duty for the first year of its life.
 

·
Overclocker in training
Joined
·
14,315 Posts
Hi,
Third party seller likely will ship anywhere.
 

·
Registered
Joined
·
105 Posts
In Italy I'll pay at least an extra 22%.

I've found only these at a "reasonable" price (over 50€ more expensive e than Kingston 3333) :

G-Skill - Kit di memoria Ripjaws V Serie F4-3200C14Q-32GVR 32 GB (8 GB x 4) DDR4 3200 MHz CL14, colore: rosso fuoco https://www.amazon.it/dp/B01AHWVPKY/ref=cm_sw_r_cp_apa_i_nH4fEbT5GM7AC

What do you think about? The heatsinks are not beautiful but they cost 50/80 € less than other similar B-die ram.

Thank you.


Inviato dal mio LYA-L29 utilizzando Tapatalk
 

·
Overclocker in training
Joined
·
14,315 Posts
In Italy I'll pay at least an extra 22%.

I've found only these at a "reasonable" price (over 50€ more expensive e than Kingston 3333) :

G-Skill - Kit di memoria Ripjaws V Serie F4-3200C14Q-32GVR 32 GB (8 GB x 4) DDR4 3200 MHz CL14, colore: rosso fuoco https://www.amazon.it/dp/B01AHWVPKY/ref=cm_sw_r_cp_apa_i_nH4fEbT5GM7AC

What do you think about? The heatsinks are not beautiful but they cost 50/80 € less than other similar B-die ram.

Thank you.


Inviato dal mio LYA-L29 utilizzando Tapatalk
Hi,
Can't see the tested latency timings if 14-14-14-34 buy it.
Yep looks good :thumb:

https://www.gskill.com/specification/165/184/1536132712/F4-3200C14Q-32GVR-Specification
 

·
Registered
Joined
·
151 Posts
Set "Phase Control" to Optimized, you need direct contact VRM liquid cooling for Extreme. Should be under the DIGI+ settings in the BIOS. Best way to check if it is a faulty sensor is to use an IR thermometer on the VRM heatsinks. Make sure power duty control is set to "T.Probe" as well. Check the attachments.

Messing about with VRM settings in AiSuite can cause these issues as well; uninstall AiSuite if you have it installed, before doing all this.
Out of curiosity, do you know which one of the settings "Auto" uses for CPU Phase Control?
 

·
Joined
·
2,512 Posts
Out of curiosity, do you know which one of the settings "Auto" uses for CPU Phase Control?
I think it uses Standard when there is no overclock, and Optimized when the system is overclocked. The behaviour does differ from BIOS to BIOS though, I've always used Optimized, ASUS seem to know what they're doing most of the time, mobo still running fine after nearly 5 years.
 

·
Registered
Joined
·
1,082 Posts
Anyone have issues with SA voltage not being applied ? I'm on bios 2101. I have SA set to 1.0v but in bios and in windows its showing 1.2v and things are getting toasty.
 

·
Overclocker in training
Joined
·
14,315 Posts
Hi,
Last I remember system agent is a offset unless going full manual mode.
 

·
Registered
Joined
·
1,082 Posts
Hi,

Last I remember system agent is a offset unless going full manual mode.
Yeah I am full manual, set to 1.0v but that's not what I'm getting.


Sent from my SM-G975F using Tapatalk
 

·
Registered
Joined
·
2 Posts
My Results.

Hi,

i own the 6850k for about 3 Jeahrs now.Bought it very cheap around 250 dollar, and the Mainboard for 100 bucks both new. I have done a lot of weaking testing etc.
I wana show my results to compare. Using a Gigabyte x99 gaming 5P. Bios without Meltdown patch.

BCLK @ 102.3 Stable
Ratio 43 @ 4.4 GHZ Stable (can do 4.5Ghz @ 1.351 V but its to hot for me dont like go over 69C under stress-testing so i stay with 4.4)
Uncore @ 3580 GHZ for more there is needed mutch more Voltege so i stay there(sweet-spot)
RingVoltage @ 1.180V inc Offset (+0.130V) in adaptive mode
Vcore @ 1.313V Inc Offset (+0.099V) in adaptive mode
VCCIO @ Stock -0.020V slight undervolt
Sysagent @ Stock -0.020V slight undervolt
Mem @ 3266 Cl 13 13 13 13 26 240 @1.4V
VRIN @ 1.900V
Using low VRM @300-400 SF
LLC @ medium level 3

The Performence is very nice:
Cinebench R15 [email protected] 1440 /Single @ 196
Cinebench R20 [email protected] 3380 /Singel @ 450
Timespy @ 7530 CPU score

Very close to a 8700K stock.
Sorry for my bad englisch and the misspelling im a dyslexic :)
 

·
Registered
Joined
·
2 Posts
Hi,

i own the 6850k for about 3 Jeahrs now.Bought it very cheap around 250 dollar, and the Mainboard for 100 bucks both new. I have done a lot of weaking testing etc.
I wana show my results to compare. Using a Gigabyte x99 gaming 5P. Bios without Meltdown patch.

BCLK @ 102.3 Stable
Ratio 43 @ 4.4 GHZ Stable (can do 4.5Ghz @ 1.351 V but its to hot for me dont like go over 69C under stress-testing so i stay with 4.4)
Uncore @ 3580 GHZ for more there is needed mutch more Voltege so i stay there(sweet-spot)
RingVoltage @ 1.180V inc Offset (+0.130V) in adaptive mode
Vcore @ 1.313V Inc Offset (+0.099V) in adaptive mode
VCCIO @ Stock -0.020V slight undervolt
Sysagent @ Stock -0.020V slight undervolt
Mem @ 3266 Cl 13 13 13 13 26 240 @1.4V
VRIN @ 1.900V
Using low VRM @300-400 SF
LLC @ medium level 3

The Performence is very nice:
Cinebench R15 [email protected] 1440 /Single @ 196
Cinebench R20 [email protected] 3380 /Singel @ 450
Timespy @ 7530 CPU score

Very close to a 8700K stock.
Sorry for my bad englisch and the misspelling im a dyslexic :)
 

·
Registered
Joined
·
1 Posts
My Results

Hi im new in this Forum.

I own the 6850k for round about 3 Jeahrs now.Bought it very cheap around 250 dollar, and the Mainboard for 100 bucks both new. I have done lots and lots of tweaking testing over the years.
I wana show my final results to compare. Using a Gigabyte x99 gaming 5P. Bios F23 without Meltdown patch.

BCLK @ 102.3 Stable
Ratio 43 @ 4.4 GHZ Stable (can do 4.5Ghz @ 1.351 V but its to hot for me dont like go over 69C under stress-testing with my kraken x62 so i stay with 4.4)
Vcore @ 1.313V Inc Offset (+0.092V) in adaptive mode
Uncore @ 3580 GHZ for 100Mhz more there is needed mutch more Voltege so i stay there(sweet-spot)
RingVoltage @ 1.160V inc Offset (+0.110V) in adaptive mode
VCCIO @ Stock -0.020V slight undervolt
Sysagent @ Stock -0.020V slight undervolt
Mem @ 3266 Cl 13 13 13 13 26 240 @1.4V
VRIN @ 1.900V
Using lowes VRM @300-400khz SF
LLC @ medium level 3
Spreed Spectrum @ endebled can turn it off on my mobo (somtimes CPU spike to 4.45Ghz)


The Performence is very nice:
Cinebench R15 Multi @ 1440 /Single @ 196
Cinebench R20 Multi @ 3340 /Singel @ 445
Timespy @ 7530 CPU score
Aida64 Lantecy mem @ 49.5 ns

Very close to a 8700K stock.

In Idle i mangets to stay under 60 watt whole system power draw from the wall, with this settings.
on full load with gaming stay around 360 Watt with my 2080ti(not overclocked).

I dont know exekt FPS Numbers because i using G-Sync at 100Hz, but i can Play all Games BFV, CoDMW all on Ultra wit Ray-Tracing on
most with 100 FPS on my 3440x1440 Monitor. Somtimes dips to 90 Fps in BFV on 64 player Map if mutch going on.

So finaly the Brodwell-E is a lot better that most People expect, or i get an Golden Chip or MB combo.
Im m using good Memory with XMP 4000 Cl17 but i was able to do 3266 Cl14 with my old cheap kit from 2016 aswell.


I would like to see other results if someone like. Or maybe someone can use my settings to help by his OC.


Sorry for my bad englisch and the misspelling im a dyslexic and no native speaker :)
 
8081 - 8100 of 8122 Posts
Top