Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11,133 Posts
Discussion Starter · #1 ·
I ran 3DMark Fire Strike now and it BSOD'ed with a 124 code. That most probably means unstable CPU OC and is never GPU-related, right?
 

·
Registered
Joined
·
689 Posts
See the codes below. Hope that helps.
Quote:
BSOD Codes for SandyBridge
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
"0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances"
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
 

·
Registered
Joined
·
1,223 Posts
You need more Vcore. perhaps the load line calibration setting needs to be changed. Not necessarily level up, but change.
 
1 - 3 of 3 Posts
Top