Overclock.net banner
1 - 20 of 70 Posts

·
Registered
Joined
·
2,528 Posts
Discussion Starter · #1 ·
Main Components:
Case: Cooler Master MasterCase Pro 5
CPU: Intel I7 6700K
Motherboard: Gigabyte Z170x Gaming 6
RAM: G.SKILL Ripjaws V Series 16GB (4GB x 4) DDR4 3000
GPU: XFX R9 290X 8GB (x2)
SSD: SAMSUNG 850 EVO 250GB
HDD: Seagate Barracuda 2TB 7200 RPM 64MB Cache
PSU: Cooler Master V1000
Fans: Cooler Master JetFlo 120 Red (x6)
OS: Windows 10 Home

Water Cooling:
CPU Water Block: EK-Supremacy EVO - Nickel/Acetal
GPU Water Block: EK-FC R9-290X - Acetal (Rev.2.0) (x2)
GPU Backplate: EK-FC R9-290X- Black (x2)
Pump/Reservoir: EK-XRES 140 Revo D5 PWM
Pump Bracket: EK-UNI Pump Bracket (120mm FAN)
Radiator:: Alphacool ST30 360mm Radiator
Radiator:: Alphacool ST30 240mm Radiator
Radiator:: Alphacool ST30 120mm Radiator
EK Terminal: - EK-FC Terminal DUAL Parallel 3-Slot - Acetal
Fittings: - Alphacool 3/8 x 1/2 Compression Fitting - Deep Black
Tubing: - Primochill PrimoFlex Advanced LRT 3/8in. ID X 1/2in. OD - Bloodshed Red
Drain: EK-AF Ball Valve (10mm) G1/4 - Matte Black

Wire Management:
CableMod CM-Series VS Cable Kit - Red
CableMod Cable Combs - Black
Phobya 4pin PWM Extension 30cm - Black (x2)
Phobya 4pin PWM Extension 60cm - Black (x2 x1 )
GELID 350mm PWM Y Cable - Black (x2)
Startech 12" round SATA Cable (x2)

Lighting:
CableMod WideBeam Magnetic LED Strip White - 30cm

Original Components:
CPU: Intel Core i7-5820K
Motherboard: MSI X99A SLI Plus
 

·
Registered
Joined
·
1,100 Posts
Sub!
 

·
Registered
Joined
·
588 Posts
Subbed, i wanna see how nice a loop can be done in this case, it might be mine in the future, i hesitate between this case and a Define S, or an Enthoo Pro (if budget let me buy it)
 

·
Registered
Joined
·
2,528 Posts
Discussion Starter · #13 ·
Quote:
Originally Posted by OxygeenHD View Post

Subbed, i wanna see how nice a loop can be done in this case, it might be mine in the future, i hesitate between this case and a Define S, or an Enthoo Pro (if budget let me buy it)
Hopefully it turns out as planned. I will have some updates after black friday
 

·
Registered
Joined
·
22 Posts
Im going to be building a custom loop in this case as well.
My main obj. is to get my 980ti classified underwater.
Thinking about going with a single d5, along with this top: http://koolance.com/pump-nozzle-and-reservoir-base-for-pmp-450-60mm-od
3/8 x 1/2 inch tubing, most likely black.
a 280mm rad upfront......wondering if I can fit a push pull config up front.
a 240mm uptop,
and am also wondering if I can fit a 60 x 200mm res without removing the 5.25 bays.

Cant wait to see more pics, i looked at your other builds, and can clearly see this case is in good hands with you.
 

·
Registered
Joined
·
2,528 Posts
Discussion Starter · #20 ·
Quote:
Originally Posted by dave7970 View Post

Im going to be building a custom loop in this case as well.
My main obj. is to get my 980ti classified underwater.
Thinking about going with a single d5, along with this top: http://koolance.com/pump-nozzle-and-reservoir-base-for-pmp-450-60mm-od
3/8 x 1/2 inch tubing, most likely black.
a 280mm rad upfront......wondering if I can fit a push pull config up front.
a 240mm uptop,
and am also wondering if I can fit a 60 x 200mm res without removing the 5.25 bays.

Cant wait to see more pics, i looked at your other builds, and can clearly see this case is in good hands with you.
I like the pump, very nice
thumb.gif


A 200mm res may be a little tight w/ the 5.25" bays. The bottom of your res will probably need to be sitting on the plate above the PSU.

Just for reference, the Pump/Res i got is 190mm in height.
 
1 - 20 of 70 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top