Overclock.net banner

[build log]Mountain Mods U2F0 i7 WC build log Pics 11-09-09

5694 57
Hi,

I have moved to i7 recently and I am going to make my WC loop look better too.
I am also moving from my Cosmos S to my Mountain Mods U2f0 case.
Yah, I chose to use my Mountain Mods case over my Tj07. So far I am convinced that the U2f0 will be better for my use unless someone will convince me. I will have two loops inside the case, but for now I will be doing the CPU because my 4870x2 broke today and I have RMA it. Grrrr.
I have sold my old parts and bought these:

So far, here are my parts:

Intel Core i7 920 D0
Rampage II Extreme
G. Skill Trident 6gb 2000mhz
Corsair 1000HX

Here are my water cooling parts the I bought:

1x Swiftech Apogee XT
1x MCR320
1x ACryan rad grill 120x3
6x Xigmatek orange fans
8x Shin-etsu thermal pads
1L Feser UV orange coolant
1x Feser one UV purple dye
2x MCP355 with Petras top.
1x Ekres 100 with anti cyclone
18x Bitspower 1/2" ID 5/8" OD compression fittings
7x Bitspower 45 degree silver shining dual rotary fittings

Here are the stuff I already have:

Black Ice GTX360
Swiftech MCRres V2
Scythe Ultra Kaze 2k and 3k

I also have some spare water cooling parts that will be unused so I will selling some parts soon including the Tj07
.

I have some mods I have to do with my case also. Please let me know if have any suggestions. THanks!

Here are the pics from all my the progress:


10/30/09--Top Panel mod. Installing ACryan triple fan radgrill
11/02/09--Installing fans/shrouds on rad and mouting the rad on the panel and the CPU/NB water blocks
11-09-09--Wire sleeving|CPU filling & GPU loop set up| CPU/GPU stock idle and load temps

Here are some pics for everyone:

1 - 20 of 58 Posts

·
Registered
Joined
·
2,580 Posts
Looks good!!
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #7 ·
Quote:

Originally Posted by slickwilly View Post
I purchased a mother board tray, HDD to 120mm fan mounting kit and a 5 1/4" 5 bay
enclosed from Mountain mods and if their case's have the same quality that my small parts do then they make 1 fine case.

Looking good

Let hope so mate
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #10 ·
Quote:

Originally Posted by havox View Post
Geez that thing is huge What can you fit on the other side liek 10 rads?
Yah its fairly huge. Its 18x18x18 inches.
I could put a dual rad on the other side or a triple rad if I buy a diff side panel from Mountain Mods.
But in my case I will have to mod the top panel to fit another triple rad.
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #12 ·
Quote:

Originally Posted by t9N View Post
mountain mods is awesome! too expensive though, i wanted the ASCENSION!
yah...I wouldnt get this case if it was $359usd + shipping. Hehe..
 

·
Registered
Joined
·
1,074 Posts
lookin sweet
so where's your Cosmos S going?

we pretty much have the same hardware, that RAM will allow you to push a decent OC. not to mention that mobo is amazing when it comes to OC'ing, you can directly type in 21x multiplier.

i was considering buying that case, but i;d have nowhere to keep my cosmos s + it would cost alot to ship to Canada.

anyways, keep up the good work!! Subbed!
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #15 ·
Quote:


Originally Posted by like30ninjas
View Post

lookin sweet
so where's your Cosmos S going?

we pretty much have the same hardware, that RAM will allow you to push a decent OC. not to mention that mobo is amazing when it comes to OC'ing, you can directly type in 21x multiplier.

i was considering buying that case, but i;d have nowhere to keep my cosmos s + it would cost alot to ship to Canada.

anyways, keep up the good work!! Subbed!

Thanks my friend.

Sadly, I will have to part ways with my Cosmos S. Right now, I still have a Tj07 laying around and not being used. The Tj07 is so beautiful that I cant even decide if I should sell it or not. Hehe..
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #16 ·
Quote:


Originally Posted by ProjecT TimeZ
View Post

Wow, if that's the same one, it's been passed around OCN


Hehe.Yup. Its the same one..
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #17 ·
Hey guys,

I made some progress today before going to party...Heheh.. Happy Halloween to everyone!!

I was able to cut out my top panel to fit my GTX360 rad and my gorgeous ACryan radgrill. I though I did a pretty nice job with my Dremel.I think it looks great with the radgrill on. ALthough I still have to refine the edges. You'll see the imperfections in one of the pics. Here they are!

Enjoy!
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #19 ·
Quote:

Originally Posted by ProjecT TimeZ View Post
Nice cuts


Small world seeing as I had it for a day or two haha.
Haha..So, you were the first owner? Then to milkcow? Now me?


Thanks
 
1 - 20 of 58 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top