Overclock.net banner
1 - 20 of 28 Posts

·
Registered
Joined
·
804 Posts
Discussion Starter · #1 ·
Let go!

Put the case onto the Carbon vinyl
IMAG0689.jpg


Cut everything out
IMAG0690.jpg


Stick it!
IMAG0692.jpg


Thnks to L3P i had some black assortiment of inbusses :rock:
thumb.gif

IMAG0693.jpg


Finished!
IMAG0695.jpg


IMAG0696.jpg


IMAG0698.jpg


IMAG0699.jpg


IMAG0700.jpg


IMAG0701.jpg


Tried something original with the Window panel
smile.gif

IMAG0706.jpg


IMAG0710.jpg


Better pics in Daylight.
IMAG0717.jpg


IMAG0718.jpg


IMAG0719.jpg


IMAG0720.jpg


IMAG0721.jpg


Bought some random hardware
wink.gif


New:
OCZ OCZSSD2-2VTXE120G, voor die 60 euro
wink.gif

imhmnt.png


Used
Mobo en Cpu
smile.gif


Asus Rog maximus 3
asus%20maximus%203%20extreme.jpg


Intel 875K
scaled.php?server=217&filename=p1040184q.jpg&res=landing


Carbonize the cpu block till i can afford a identical plexi one
smile.gif

IMAG0754.jpg


mobo with memory build:)
IMAG0755.jpg


IMAG0756.jpg


IMAG0757.jpg


IMAG0758.jpg


Testfit in the case, getting cramped already
tongue.gif

IMAG0759.jpg


IMAG0760.jpg


I have some little room left
IMAG0762.jpg


With sidepanel
IMAG0763.jpg


positioned the Dual pump and drilled the holes for it.
IMAG0764.jpg


IMAG0765.jpg


Bought at my local plumber store 2 metre of acrylic tubing.
IMAG0767.jpg


First try:)
IMAG0768.jpg


My working bench
wink.gif


Heat it up, hold it inplace, take a sprint to kitchen and cool it down, mission succesfull!
IMAG0772.jpg


IMAG0774.jpg


IMAG0779.jpg


Bp C47 where in the mail, gladly
biggrin.gif
!:
IMAG0780.jpg


Same as the SSD!
IMAG0781.jpg


Prepared the tubing for the fittings, Just like Kier does, grind a 8mm edge.
FB_IMG_13486706283842345.jpg


FB_IMG_13486706552061256.jpg


FB_IMG_13486737334174416.jpg


Then i used speedhack! lol, i forgt to make shots of the buildup progress
tongue.gif


IMAG0782.jpg


IMAG0783.jpg


IMAG0784.jpg


IMAG0785.jpg


IMAG0786.jpg


IMAG0787.jpg


I dont have budget for the sleeving, maybe next month
smile.gif

IMAG0788.jpg


Because there is no room between panel and mobotray, i need to route everything between the mobo and the mobopanel, but it worked
smile.gif

IMAG0789.jpg


IMAG0790.jpg


IMAG0791.jpg


IMAG0792.jpg


IMAG0793.jpg


IMAG0794.jpg


IMAG0795.jpg


IMAG0796.jpg


Some what clearer pics taken with a handycam
smile.gif

not allot of tekst, just better pics

Did some random sleeving, put 24/gpu extenders, black SATA cable and much better cablemanagement
smile.gif


CIMG4369.jpg


CIMG4370.jpg


CIMG4371.jpg


CIMG4372.jpg


CIMG4373.jpg


CIMG4374.jpg


CIMG4375.jpg


CIMG4376.jpg


CIMG4377.jpg


CIMG4378.jpg


CIMG4379.jpg


CIMG4380.jpg


CIMG4381.jpg


CIMG4382.jpg


Also did a boot
smile.gif

CIMG4383.jpg


Soo, its quite done now, The system is up and running smoothly after some flaws,

First, because the solid tubing didnt expand to pick up the pressure what was left behind when u turn the system off i had some minor leaks, after a little chat Peter(l3p) came with an idea, that was to make a kind of balance line of 1/2tubing, so i made it like he suggested, and damn it worked, was a miracle! its running real smoothly now, Gladly
wink.gif


Piics
smile.gif


IMAG0820.jpg


IMAG0821.jpg


IMAG0822.jpg


IMAG0823.jpg


IMAG0824.jpg


IMAG0825.jpg


IMAG0826.jpg


IMAG0827.jpg


IMAG0828.jpg


IMAG0829.jpg


IMAG0830.jpg


IMAG0831.jpg


IMAG0832.jpg


IMAG0833.jpg
 

·
Registered
Joined
·
569 Posts
Awesome! Looking great, really. Never thought about acrylic tubing bent like that, and the carbon fiber vinyl makes the case look awesome .

However I don't understand something, why don't you put tubbing like this:



Anyway, looks awesome! Maybe if you had a res outside it would show off more but anyway, it's fantastic
smile.gif
 

·
Registered
Joined
·
251 Posts
I like the build it looks really nice. Explain more of what you had to do to stop the leaks because i wasn't really sure what you meant on your last post.
 

·
Registered
Joined
·
804 Posts
Discussion Starter · #5 ·
Quote:
First, because the solid tubing didnt expand to pick up the pressure what was left behind when u turn the system off i had some minor leaks, after a little chat Peter(l3p) came with an idea, that was to make a kind of balance line of 1/2tubing, so i made it like he suggested
So basicly i connected a 50cm piece of tygon 1/2 tubing, used that ass fill and bleed port(connected to highest reservoir port) and that sorted my pressure fails.

Acrylic tubing can not expand to pressure into the loop i had with 2 mcp355 pumps, after ataching the tygon tybing i had that sorted.
 

·
Registered
Joined
·
1,009 Posts
Loving it (apart for the weird reservoir). I've never liked the copper/nickel tubing. Acrylic tubing though looks perfect Oo. I'm guessing that with acrylic tubing you'll see your coolant as well as in the reservoir, that you won't ever have plasticizing issues, that the tubing won't change colour... that's really the dream tubing. Well it looked like the dream tubing until you mentioned having had leaks because of pressure. I'm not sure I understand the pression / tygon thing by the way.

Oh, almost forgot, how much did the tubing cost and what case was that ?

Quote:
Originally Posted by MrDucktape View Post

Awesome! Looking great, really. Never thought about acrylic tubing bent like that, and the carbon fiber vinyl makes the case look awesome .
However I don't understand something, why don't you put tubbing like this:
Good question.

EDIT: What did you cut the acrylic with and how did you get the right length ?
 

·
Registered
Joined
·
804 Posts
Discussion Starter · #8 ·
The tubing costs 10 euro for 2 meter.

I choose this route to get 2 long straight lines because i tried both options but liked this one more.

Here some pics
smile.gif


The 2 trouble makers
wink.gif


When spinning up no problems at all
smile.gif
but when u turn them off The fluids stops, u create a vacuum pressure something ish

CIMG4393.jpg


The Line that can take all the pressure and fill line and bleed line

CIMG4385.jpg


CIMG4386.jpg


CIMG4388.jpg


CIMG4392.jpg


I hope it wil be clearer about that
smile.gif


I made the line rougly inshape, them measure everything, and cut in with 5mm each time
smile.gif
i cut it with a angle saw

Gehrungssaege-Modell_354.jpg
 

·
Registered
Joined
·
1,009 Posts
That's really cheap Oo.
Makes you wonder why nobody uses it. I know I will, even if it's only in a year. But I will.

How comes that pressure thing doesn't happen with copper/nickel tubing if it's caused by the acrylic not being able to stretch ?
(I haven't read a lot of hard tubing work logs so I might be wrong about that)
That line is really well hidden. If you hadn't shown us pics of it I don't think I would've noticed it. Good job on that
thumb.gif
.

That saw looks pretty confusing
headscratch.gif
 

·
Registered
Joined
·
804 Posts
Discussion Starter · #10 ·
Quote:
Originally Posted by steelkevin View Post

That's really cheap Oo.
Makes you wonder why nobody uses it. I know I will, even if it's only in a year. But I will.
How comes that pressure thing doesn't happen with copper/nickel tubing if it's caused by the acrylic not being able to stretch ?
(I haven't read a lot of hard tubing work logs so I might be wrong about that)
That line is really well hidden. If you hadn't shown us pics of it I don't think I would've noticed it. Good job on that
thumb.gif
.
That saw looks pretty confusing
headscratch.gif
Because u need to File the Acrilyc tubing to 12mm and copper plumbers piping is 12mm from origin! so u have no weak spots ^^

And this loop is only 300ML With 2x mcp355 can u imagine
wink.gif
 

·
Registered
Joined
·
1,009 Posts
Quote:
Originally Posted by k.3nny View Post

Because u need to File the Acrilyc tubing to 12mm and copper plumbers piping is 12mm from origin! so u have no weak spots ^^
And this loop is only 300ML With 2x mcp355 can u imagine
wink.gif
Oo 300mL for CPU+GPU+2xmcp355+reservoir+360 rad ?

With 8mm ID clearflex60 tubing my loop needs an entire liter (1000mL). You really sure about yours only needing 300mL ? What's that reservoir's size ? Mine's a 250mL one and I've got two 55mm thick 280mm rads (but no GPU block). Lets say that your res is 50mL and your single 360 drinks about the same amount as one of my 280s. That'd make yours 800mL minus the rad. I've no idea how much mL a full rad contains, I'm guessing it's a lot, maybe 300mL which would mean my CPU block, pump and all the tubing needs 150mL. Does that sound about right ?
If those values are right then your loop (lets say a GPU=50mL, again, I've no idea what it really does) would be at least 500mL. And my values are most likely wrong so that makes 300mL really not much.
Oh, here's mine btw (those are the "old" smartphone pictures, I'm still looking for a good guide on taking photos of PCs, then I'll borrow my sister's camera):


 

·
Registered
Joined
·
804 Posts
Discussion Starter · #12 ·
This is a magicool 360 rad, holds up to 100/150ml fluids
wink.gif
res around 50/75

My reservoir can fit 5 times less fluids then your res xD! And magicool rad is like 2.5cm thick like a normal fan
smile.gif


So Nah, u cant compare that
tongue.gif
 

·
Registered
Joined
·
804 Posts
Discussion Starter · #14 ·
Rad: allrount temps are 23 degrees (roomtemp ) with 3 tfc triebs 1650 rpm @ 1000 rpm daily.

Pumps: there my pink phantom build pumps, and because i can xD
 

·
Registered
Joined
·
804 Posts
Discussion Starter · #19 ·
Quote:
Originally Posted by willywill View Post

This is one crazy build, you got my vote on build of November or should i say for 2012.
Nice profile picture
wink.gif
Spoon Sports
biggrin.gif
!
Quote:
Originally Posted by WebsterXC View Post

drool.gif

Epic CPU block is epic. Please don't replace it...
Haha thanks thanks
biggrin.gif
!
wink.gif
 

·
Registered
Joined
·
1,009 Posts
1 - 20 of 28 Posts
Top