Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
926 Posts
Discussion Starter #1
so all the users of P5W DH should already know that C1E is messed up with this board, but it is only because of the bios.<br><br>
Now thanks to Davexl at XS we have a way of enjoying the benifits of C1E. With the rmclock people who have an E6600 or above can now enable C1E, p-state transition, and ODCM, leading to a possible drop of >10C idling. Do be careful because with the C1E enabled it drops your processors lowest multi's voltage to 1.1v, but most E6600 should be able to handle this even at 400x6.<br><br>
E6400 and E6300 are not left out of this either, though they can't use C1E stably because of the fewer amount of multipliers, they can still enable ODCM, still lowering idle temperatures, but not as much.<br><br>
Edit: Linky Linky: <a href="http://www.xtremesystems.org/forums/showthread.php?t=121488" target="_blank">http://www.xtremesystems.org/forums/...d.php?t=121488</a>
 

·
Registered
Joined
·
926 Posts
Discussion Starter #3
added link
 
1 - 3 of 3 Posts
Top