[gangster]

i will be water cooling a core i7
will be using 1/2" Hose fitting this is my first time at water cooling

Swiftech MCR320-QP Triple 120mm Radiator

EK Supreme LT CPU 1366 Acetal

Scythe Ultra Kaze 3000

and i wanted to use this pump

http://cgi.ebay.co.uk/1750-LTR-INLIN...3%3A2|294%3A50

will it work???????????

 

[7hm]

Yes, it will work but it wont be amazing.

 

[kimosabi]

It will work but don't expect it to be silent. Great flow though. Not too much head compared to a D5 or DDC so it will struggle more in a complex loop.

The barbs on it is 17.5mm, 1/2" is 12.7mm. It would be very hard to get 1/2" tubing on that pump unless you use adapters or something and then you'd need to know which threads are used on it. It's also a wall feed pump.

Since you're a beginner I'd strongly advice you to go for a D5 or a DDC pump. DDC is more than enough though, and since it's a bit cheaper, that's where I would go.

*edit* If you want a strong and lasting WC setup, DO NOT skimp on the pump. It's the most important part.

 

[corky dorkelson]

That pump would need to be submerged and powered by 120 volts. I don't think that is a good idea.

 

[gangster]

i was trying to make a water cooling setup for around £200 iam in the uk