Overclock.net banner

1 - 15 of 15 Posts

·
Banned
Joined
·
1,057 Posts
Discussion Starter · #1 ·
i had a molex case fan, and i wanted to be able to adjust the speed of the fan, and i had a 3 pin connector from an old heatsink, so i wired the new fan after i cut and stripped the wires, ripped the wires out of the 3 pin, and stuck the wires in the 3 pin and taped it up. would a 12V fan blow if used with a 3 pin?
 

·
Banned
Joined
·
387 Posts
Quote:


Originally Posted by Madkat

i had a molex case fan, and i wanted to be able to adjust the speed of the fan, and i had a 3 pin connector from an old heatsink, so i wired the new fan after i cut and stripped the wires, ripped the wires out of the 3 pin, and stuck the wires in the 3 pin and taped it up. would a 12V fan blow if used with a 3 pin?


yes it would
 

·
Banned
Joined
·
1,057 Posts
Discussion Starter · #7 ·
ssssh let me try this again LOL
i was checking speed fan. my hds are runnin a TAD toasty so i cranked the fan up lol
 

·
^^That's my user name^^
Joined
·
9,931 Posts
bad link
 

·
Banned
Joined
·
1,057 Posts
Discussion Starter · #14 ·
here.. stupid yahoo! *laughs because he used so much ducktape it looks like a giant turd LOL* come on i walk faster than you upload!
to a fast death LOL
 
1 - 15 of 15 Posts
Top