Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter · #1 ·
New question.. What size screw do I need to get if I want to add fans to my antec three hundred two

Thanks
 

·
Amiga 500
Joined
·
3,680 Posts
Depending on how you're going to mount them,there are various sizes..



Usually 10 or 12mm will do the trick

EDIT :

where exactly in the case do you want to add fans?Front intake?Side?

Because according to the manufacturer's manual,the front intake fans will need longer screws , like so :



If you want to add front intake fans you need the long screws..Maybe take one out and measure it,although it seems like 25-30mm

Otherwise standard fan screws that are included with the fans you'll be buying will do..
thumb.gif
 
  • Rep+
Reactions: saywhuut

·
Registered
Joined
·
259 Posts
Discussion Starter · #3 ·
Quote:
Originally Posted by mAs81 View Post

Depending on how you're going to mount them,there are various sizes..



Usually 10 or 12mm will do the trick

EDIT :

where exactly in the case do you want to add fans?Front intake?Side?

Because according to the manufacturer's manual,the front intake fans will need longer screws , like so :



If you want to add front intake fans you need the long screws..Maybe take one out and measure it,although it seems like 25-30mm

Otherwise standard fan screws that are included with the fans you'll be buying will do..
thumb.gif
I'm going to be installing one on the side and one in front. Thanks for your help
 
1 - 3 of 3 Posts
Top