[Enigma8750]

make custom light and fan controllers to fit into the 5 and a quarter bin or the 3 and a half bin in cases. The wiring is easy and parts are available for a nominal fee.

 

[thehighlander123]

if u make fan shrouds for around 10/12 bux a pop ill buy six

 

[radodrill]

hmm the Flying WV wouldn't be too hard

 

[Enigma8750]

 

[Manyak]

I've got a good one...

I've got an Arctic Web TEC water block, and it needs a new mount so that it can fit on a LGA1366 socket (its only got LGA775/AM2 mounts). Its a very simple piece, its just that metal bracket you see with all the holes in it in the picture underneath.

If you can make one just like it but with holes for LGA1366 as well, I can stick it in my scanner and send you the exact dimensions of it.

Also, if its not too much, that block could also use a copper top (its currently half Al half Cu, which as you probably know is really bad in a WC loop).

 

[samfreese]

Good God! Lots of stuff to digest here. I'll post up tomorrow with some replies but for now I need some sleep. I think I'll have plenty to do now...

 

[grahamcrackuh]

+Rep for a really good idea man.

Thanks for giving back to the community.

 

[SmasherBasher]

LOL

Did you think the floodgates wouldnt open?
Now you'll have something to do

 

[DIRTYDUCK]

I 100% agree with whoever first said Dice pots...I would be soooo stoked on a dice pot!!! They should be easy to make right?

 

[Adrienspawn]

Definitely radiator grills. The ones companies sell are like 30$ each. I'm sure a lot of people are looking for some on the cheap, and they should be fairly easy to make. I have no experience whatsoever in those programs though.

 

[thehighlander123]

so whats the word on those shrouds =]?

 

[samfreese]

Quote:

Originally Posted by H3||scr3am hrmmmm, can you make custom water blocks out of copper? or is that too much? what about copper base, brass tops?

I can make them either way.

Quote:

Originally Posted by RaBidRaBit You could bang out a few cpu pots.

I could

Quote:

Originally Posted by pr0bie How much Round a bout for you to make a nice NB and mosfet Waterblock if i drew i up, ball park? EDIT: What About a LN2 or DICE pot

Not doing things for money in this thread.

Quote:

Originally Posted by Enigma8750 Fan Shrouds would be great. Get Ideas from custom auto wheels. and CNC them. You could sell them on OCN like Candy. For 5 dollars + shipping would be a good start, but you know what it cost to make it. 120mm Fan Shrouds with unique features 140mm Same Also buy one Case.. Like a Lian Li PC-A05B and cut a really awesome design in it. Sell it but make sure that the person that your selling to send thier case door to you. Then you have a unlimited supply of material. And really good paying jobs. I would ask 80.00 at least for the first one to cover the expence of the first case.

Good thoughts, but I don't want to do a production run.

Quote:

Originally Posted by thehighlander123 AHHH 120mm fan shrouds 1.5'' deep would be awesome

WTH are fan shrouds? I've seen several mentions. PLease, somebody give me a picture

Quote:

Originally Posted by Enigma8750 make custom light and fan controllers to fit into the 5 and a quarter bin or the 3 and a half bin in cases. The wiring is easy and parts are available for a nominal fee.

Not doing things for money and really not into assembling all that little stuff

Quote:

Originally Posted by thehighlander123 if u make fan shrouds for around 10/12 bux a pop ill buy six

Not doing things for money

Quote:

Originally Posted by radodrill hmm the Flying WV wouldn't be too hard

This will be done next week on the waterjet. Congrats, you're first

Quote:

Originally Posted by Enigma8750

Interesting, but I'd need heat pipes and info on where to drill recesses for water to flow through, etc

Quote:

Originally Posted by Manyak I've got a good one... I've got an Arctic Web TEC water block, and it needs a new mount so that it can fit on a LGA1366 socket (its only got LGA775/AM2 mounts). Its a very simple piece, its just that metal bracket you see with all the holes in it in the picture underneath. If you can make one just like it but with holes for LGA1366 as well, I can stick it in my scanner and send you the exact dimensions of it. Also, if its not too much, that block could also use a copper top (its currently half Al half Cu, which as you probably know is really bad in a WC loop).

Maybe. I'd need exact dimensions.

Quote:

Originally Posted by DIRTYDUCK I 100% agree with whoever first said Dice pots...I would be soooo stoked on a dice pot!!! They should be easy to make right?

Somebody give me some dimensions and a drawing. This sound like a good lathe project

Quote:

Originally Posted by Adrienspawn Definitely radiator grills. The ones companies sell are like 30$ each. I'm sure a lot of people are looking for some on the cheap, and they should be fairly easy to make. I have no experience whatsoever in those programs though.

Pics?

Wow, that's alot of interest. I'll definitely be busy now...

 

[S2000_Skyline12]

What about this? A case badge of this would be awesome

 

[timw4mail]

I'd like a 200-300% aluminum replica of an Athlon CPU, you know, the ones with the bare core and rubber bumpers?

 

[samfreese]

Quote:

Originally Posted by S2000_Skyline12 What about this? A case badge of this would be awesome

Why yes, yes it could. However I think those games are the

, so I'm going to pass on making that. But yes, if you guys have a logo like Skyline just put up, they are stupid easy to make on the waterjet.

EDIT: @timw4mail All those pins on the underside terrify me. That would be pretty much impossible minus having, well, I don't know. The top side would be pretty simple, but all those pins on the underside. That's the stuff of nightmares.

 

[xlastshotx]

I dice/ln2 pot would be awesome, but I would be quite happy if I could get my username waterjetted out of a piece of aluminum or something. I have been using this name for a long long time.

Or maybe you could waterjet a bunch of ocn logos out of a sheet of aluminum for some of the case modders around here

to what you are doing, it is very nice of you. I wish I had the kind of equipment access you have!

 

[samfreese]

Quote:

Originally Posted by xlastshotx Or maybe you could waterjet a bunch of ocn logos out of a sheet of aluminum for some of the case modders around here

I was thinking more for folders than for case modders, but yeah, close enough.

 

[xlastshotx]

Quote:

Originally Posted by samfreese I was thinking more for folders than for case modders, but yeah, close enough.

What about a folding @ home logo? That would be pretty cool imo.

Maybe like the "I fold for Overclock.net" logo below the rep button, just bigger (I cant seem to find a large version of that anywhere). It could maybe be the overall outer shape cut, to be painted like the logo. Or maybe that with some of the inner parts cut to retain the circles without the piece having to be painted to get the logo across.

 

[samfreese]

I wouldn't have time to do all the colors on it. The flame would be a much easier and cooler cutout, plus, no colors involved.

 

[BradleyW]

Could you make me a 2 heatsinks to cover my VRM's on my mobo?