Overclock.net banner

1 - 20 of 934 Posts

·
Registered
Joined
·
1,931 Posts
Discussion Starter · #1 ·


Adamski Mods' FB page


Scratch Build by Adamski07

Theme : Welcome to "FREESTYLE MODDING!" A mod of case where nothing is planned. Just mod and be surprised!
smile.gif
Theme? Nothing actually. Just another Prodigy Build.
biggrin.gif
Will paint the case and add some awesome exterior works. This is actually my first real modding experience.

Specs:

Case :Bitfenix Prodigy (arrived 10/08/12)
CPU: Intel i5-3570k (Own)
Mainboard: ASUS Maximus V Gene Z77(arrived 10/30/12)
RAM: CORSAIR DOMINATOR GT 16GB (arrived 11/7/12)
GPU: EVGA GTX 680 (Own)
PSU: Seasonic Modular PSU (Own)
SSD/HDD: Samsung 256GB and 5TB Seagate (Own)
COOLING : Watercooled mosfet, cpu, and gpus (arrived 11/1/12)

Water Cooling parts:

MOBO Block: EK ASUS Maximus V Gene Liquid Cooling Block Set - Acetal + Nickel (EK-MOSFET ASUS M5G - Acetal + Nickel) (arrived 11/1/12)

RADS:Two(2) Swiftech MCR220-XP eXtreme Performance Dual 120mm Slim Radiator - (MCR220-XP)(arrived 11/1/12)

PUMP: Aquacomputer D5 Pump Motor w/ USB and Aquabus Interface (41093) (arrived 11/1/12)

PUMP TOP: EK D5 X-Top Acetal Pump Top CSQ(arrived 11/7/12)

Reservoirs : Swiftech MCRES Micro Rev. 2(arrived 11/1/12)

CPU Bock: EK Supreme LTX Acetal + Nickel CSQ (arrived 11/1/12)

Fittings: Moonsoon and Bitspower Fittings

Other components will be added as I go through with the project.
Comments, questions, critiques, and ideas are welcome!

Note: First few pages might confuse you. This build was meant to be a budget HTPC and I had no plan to modify it. Thanks!
smile.gif


I would like to thank xbournex as well! such a great guy!
thumb.gif


NEWEST UPDATE HERE: Click Here!

Current state of the build :
BEFORE MODS

AFTER MODS
















 

·
Registered
Joined
·
1,931 Posts
Discussion Starter · #3 ·
One by one I'll work on each part of the case until I get them done. Here's the table of contents for this project.

You can check out the photos of all the parts I am using through this table of contents.

Table of Contents:

I. Left Side Panel -Finished, but I wont be using this for the project. 1/30 - revised panel is now done!
II. Right Side Panel- Finished

III. Front - Finished

IV. Top - Finished

V. Back - Finished

VI. Inside
Parts:
cheap DIY acrylic bender
Maximus Gene V Arrived!
Water Cooling Stuffs!
More awesome parts arrived(Fans, pump top, RAM, and more!)
MDPC-X Sleeves thumb.gif
New pump top and res!
More sleeving stuffs! (crimper, pins , and etc)
BitFenix Hydra Pro
adamski modz hoodie biggrin.gif lol
 

·
Registered
Joined
·
1,168 Posts
Subbed. I love watching Prodigy builds. Thinking about one myself now. Can't wait to see it!
 

·
Registered
Joined
·
1,931 Posts
Discussion Starter · #5 ·
Quote:
Originally Posted by Snyderman34 View Post

Subbed. I love watching Prodigy builds. Thinking about one myself now. Can't wait to see it!
Thanks for the sub! Yeah, can't resist building one for my self.
biggrin.gif
Let me know once you go with a prodigy build too.
 

·
Registered
Joined
·
76 Posts
Subbed!
 

·
Registered
Joined
·
1,168 Posts
Quote:
Originally Posted by adamski07 View Post

Thanks for the subbed! Yeah, can't resist building one for my self.
biggrin.gif
Let me know once you go with a prodigy build too.
Will do! Mine probably won't be anything special hardware wise (I have some parts already laying around), but I may look at doing something over the top with one. Just gotta save that cash!
 

·
Registered
Joined
·
1,931 Posts

·
Registered
Joined
·
1,931 Posts
Discussion Starter · #10 ·
Quote:
Originally Posted by Snyderman34 View Post

Will do! Mine probably won't be anything special hardware wise (I have some parts already laying around), but I may look at doing something over the top with one. Just gotta save that cash!
Same idea here. I have my main rig for gaming and I just don't wanna see those other hardwares laying around. If I could save a little, I might as well upgrade other parts for this build or maybe go with a custom water cooling and sleeve the PSU cables. We'll see.
 

·
Registered
Joined
·
1,931 Posts
Discussion Starter · #12 ·
Quote:
Originally Posted by MrKay View Post

Just a heads up. EVGA Stinger is not coming out till november or even longer something to do with the pcb change
I saw Jacob's post on EVGA forum and he mentioned that. I am not rushing the build and this might take a while due to work and school.
 

·
Registered
Joined
·
2,444 Posts
Quote:
Originally Posted by adamski07 View Post

I saw Jacob's post on EVGA forum and he mentioned that. I am not rushing the build and this might take a while due to work and school.
That's all right for you then. I might upgrade to evga stinger to. Since i really like the black and red color
 

·
Premium Member
Joined
·
5,114 Posts
Subbed for my casemodding twin. Stinger's a solid looking board, we need an LGA 2011 mini ITX board.
 

·
Registered
Joined
·
1,931 Posts
Discussion Starter · #18 ·
Quote:
Originally Posted by SniperTeamTango View Post

Subbed for my casemodding twin. Stinger's a solid looking board, we need an LGA 2011 mini ITX board.
lol at case modding twins.. Good job on the window and painting btw. More on project Michelle please
biggrin.gif


Anyway, got some acrylic sheet, sand papers and primers today. On Monday, the case and spray paints will be here. Will up some pics later today. Also, I cancelled my RAM order and will look for another RAM for this build.

Thanks for everyone who subbed!
 

·
Premium Member
Joined
·
5,114 Posts
Quote:
Originally Posted by adamski07 View Post

lol at case modding twins.. Good job on the window and painting btw. More on project Michelle please
biggrin.gif

Anyway, got some acrylic sheet, sand papers and primers today. On Monday, the case and spray paints will be here. Will up some pics later today. Also, I cancelled my RAM order and will look for another RAM for this build.
Thanks for everyone who subbed!
Thanks much, I'm changing my ideas a lil bit on what I might do for the other side. Gonna post the theoretical ideas tonight.

Whats the ram plan?
 

·
Registered
Joined
·
1,931 Posts
Discussion Starter · #20 ·
Quote:
Originally Posted by SniperTeamTango View Post

Thanks much, I'm changing my ideas a lil bit on what I might do for the other side. Gonna post the theoretical ideas tonight.
Whats the ram plan?
Not sure bout the RAM yet. Any recommendation? I need a red or black colored RAM.

I uploaded some pics on first page including the SSDs and PSU. More on Monday!
 
1 - 20 of 934 Posts
Top