Overclock.net banner
1 - 15 of 15 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter · #1 ·
I have a Cooler Master 690 Mid-size case, EVGA 780i FTW mobo, and a GTX 260 core 216 55nm video card (later to run 2 in SLI). What are my options for a water cooled system that can handle all this, fit in my case, and run 2 of these cards later in SLI?

thanks for any help,

Young 3D
 

·
Registered
Joined
·
69 Posts
Discussion Starter · #3 ·
I would like to be able to cool most of it if not ALL of it. I think that's possible isn't it?

Anyways, I know there is some great for sale stuff here on OCN, I just don't know what is best seeing as I'm a very new when it comes to water cooling.

What is a good system that will work for me?
 

·
Registered
Joined
·
797 Posts
here is my suggestion for the setup

Pump-----------Laing DDC 3.2 pump
Reservoir------- XSPC Premium Acrylic Reservoir LaingDDC
Tubing----------masterkleer 1/2 ID, 3/4OD
Coolant---------Distilled water- Feser view UV blue dye-PT nuke
Radiator--------- Black ice GTX 360
CPU block--------Swiftech Apogee GTZ Extreme Performance Waterblock
fans------------- panaflo high speed 3fans
 

·
Registered
Joined
·
69 Posts
Discussion Starter · #6 ·
would the system listed above by 006 be able to cool my CPU, 2 260's and the northbridge and southbridge?

Also, where's a good website to get ALL of this stuff. Newegg doesn't have half of it. I'd like to do it all in one order if possible.
 

·
Registered
Joined
·
797 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter · #11 ·
ok, so with this system:

Pump-----------Laing DDC 3.2 pump
Reservoir------- XSPC Premium Acrylic Reservoir LaingDDC
Tubing----------masterkleer 1/2 ID, 3/4OD
Coolant---------Distilled water- Feser view UV blue dye-PT nuke
Radiator--------- Black ice GTX 360
CPU block--------Swiftech Apogee GTZ Extreme Performance Waterblock
fans------------- panaflo high speed 3fans

I should be good to go?

right now, with my 6600 at 3.5 Ghz my temps are idling at 45*C and maxing around 70*C when testing with prime 95.

what temps will I be looking at with this setup?
 

·
Registered
Joined
·
797 Posts
Quote:

Originally Posted by young 3D View Post
ok, so with this system:

Pump-----------Laing DDC 3.2 pump
Reservoir------- XSPC Premium Acrylic Reservoir LaingDDC
Tubing----------masterkleer 1/2 ID, 3/4OD
Coolant---------Distilled water- Feser view UV blue dye-PT nuke
Radiator--------- Black ice GTX 360
CPU block--------Swiftech Apogee GTZ Extreme Performance Waterblock
fans------------- panaflo high speed 3fans

I should be good to go?

right now, with my 6600 at 3.5 Ghz my temps are idling at 45*C and maxing around 70*C when testing with prime 95.

what temps will I be looking at with this setup?
-15*c of your current temps.
and also for the fittings get these http://www.petrastechshop.com/dadepofbofig.html

do you have a side window for your case?
 

·
Registered
Joined
·
69 Posts
Discussion Starter · #13 ·
How many of those connectors will I need?

and no, I don't have a side window, but its in the works hopefully.
 

·
Registered
Joined
·
797 Posts
Quote:

Originally Posted by young 3D View Post
How many of those connectors will I need?

and no, I don't have a side window, but its in the works hopefully.
i was asking about the side window because if don't have it you won't be needing the UV dye but just distilled water & PT nuke will work fine. and you will be needing 6 of those connectors for CPU only loop.

NOTE: take the measurements before you buy anything, do this so you know where and how will everything fit in or outside the case.
 
1 - 15 of 15 Posts
Top