Overclock.net banner
1 - 5 of 5 Posts

·
Registered
Joined
·
751 Posts
Discussion Starter · #1 ·
Well,this morning I finished installing all the new part into my storm trooper case,pluged in the juice and the fans start spinning,the back case fan,and the Corsair liquid cooling dual fans are spinning,but the front two are not spinning.The Video card fans are spinning but thats not the proablem,I can check the fan wires later for the front.Its pluged in hdmi to my moniter and its not booting.I get nothing on the screen,no bios,just all blank.All the parts that went into the case are all new out of the box,Asus P8 Z77-V Pro motherboard,with a I5-3570K 3.4GHZ LGA 155,and 12 gigs corsair dominator,1600 mhz.The power supply is a cooler master 1000 watt.The vid card is out of my old dell pc,its a ati 5770 for now untill my Gigabyte 7970 comes in later today.Anyone know what I should look for the,she wont boot,eg,no bios on screen.It just stays running with all the fans spinning except the front two.I even tried pluging into the onboard video with the same result.Any info will be greatly appreciated.Thanks....
 

·
Registered
Joined
·
751 Posts
Discussion Starter · #3 ·
I already tried that,the onboard video,same thing,no boot,no bios on screen.
 

·
Registered
Joined
·
9 Posts
Were you using your hdmi for onboard as well? If so do you have a dvi or vga cable you can try? Does your monitor auto sense and change to any active input or you do have to manually cycle through inputs?
 

·
Registered
Joined
·
751 Posts
Discussion Starter · #5 ·
I tried the onboard video with hdmi,the monitor is set to auto select.I will try the standard blue connector if I can find it.
 
1 - 5 of 5 Posts
Top