Overclock.net banner

Corsair Valueselect running at DDR2 [email protected] timings

1072 Views 14 Replies 6 Participants Last post by  Ropey
I heard that the fourth timing when refering to memory had almost no impact on performance but a huge impact on how high memory can be clocked, so I decided to test this out and by leaving that at 12 (my memory is rated for [email protected] 400 and [email protected] 533) I was able to accomplish DDR2 400 at 2-2-2-12 with only 2.00v vDimm! Is this crazy or what?
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top