Overclock.net banner

Corsair Valueselect running at DDR2 [email protected] timings

1075 Views 14 Replies 6 Participants Last post by  Ropey
I heard that the fourth timing when refering to memory had almost no impact on performance but a huge impact on how high memory can be clocked, so I decided to test this out and by leaving that at 12 (my memory is rated for [email protected] 400 and [email protected] 533) I was able to accomplish DDR2 400 at 2-2-2-12 with only 2.00v vDimm! Is this crazy or what?
1 - 1 of 1 Posts

· I remember when......
3,858 Posts

Originally Posted by pauldovi

How will they ever know if you put it above the stock settings?

Well, My guess is when you return it with burn marks on it, they will figure it out

Some RAM makers allow for higher voltages and still warrenty them, but you'd have to check with the manufacturer for that limit they cover.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.