Overclock.net banner

1 - 6 of 6 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
Hi
i have two sets of ram: CM2X1024-6400 x 2 and TWIN2X2048-6400C4 x1 the second of these two are brand new but CM2X1024-6400 timings are (5-5-5-18) at 1.9V But on the TWIN2X2048-6400C4 are Tested at latency settings of 4-4-4-12 at 2.1V
SPD programmed at:
jEDEC standard 5-5-5-18 values at 800MHz
EPP standard 4-4-4-12 values at 800MHz

could this work together?
 

·
Premium Member
Joined
·
1,561 Posts
Sure, but you'll probably want to start off with the slower of the two timings (5-5-5-18), and may need to up the voltage to about 2.0 or so.
 

·
Registered
Joined
·
1,888 Posts
So we're talking about 2X2GB 4-4-4-12 and 2X2GB 5-5-5-18 sticks?
Yes you may have to run them @ 5-5-5-18 (maybe 15) because those cheap Corsair 5-5-5-18 sticks are not OCable. I'd be surprised if they will even go 5-5-5-15 but try it. And yes use 1.9v or 2v. Buy some more Corsair 4-4-4-12 when you can afford it.
 
1 - 6 of 6 Posts
Top