Overclock.net banner

1 - 4 of 4 Posts

·
Banned
Joined
·
591 Posts
Discussion Starter · #1 ·
Ok. i stay at 4.5GHZ @ 1.325V for my 24/7 Oc.. and have no intention of going higher.. but just for ****s and giggles.. i did a CPU-Z validation run @ 5.0GHZ not stable of course.. just boot up and hope it stays stable long enough to hit validate..

now i got a couple questions about this..

first off..

i used 100X50 @ 1.38V (only for like 3 minutes) will this damage my cpu?

and is it impressive in the slightest that my system was even able to boot up at 5.0GHZ with only 1.38V??

http://valid.canardpc.com/show_oc.php?id=2205670&fb_source=message
 

·
DIY Guy
Joined
·
1,439 Posts
The volt is fine. Some say that 1.45 is the maximum safe volt for benching, although not recommended for 24/7 usage.

Looks like you have a good chip there.
wink.gif
 
1 - 4 of 4 Posts
Top