Overclock.net banner

CPU Multiplier dropping to 4X under load?

1906 Views 13 Replies 9 Participants Last post by  Lagpirate
Hi

I was running prime 95 and cpu-z then after a while the cpu multiplier and voltage dropped to 4X (800MHz) and 1.1V. it did this briefly a few times at first them it basically stayed at these settings, because of that I put it down to heat. at that point the cpu was at 49C. Before any asks, I have AMD cool n quiet disabled.

How can I stop this from happening, any setting in the BIOS?

Thanks



1 - 1 of 1 Posts

· Registered
Joined
·
542 Posts
It seems to me that the issue you are having is voltage droop. What do you have your LLC (load line calibration) set at? You may have to set it higher In order to supply the voltage you need. Had a similar problem on my 8120. Just my two cents
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top