Overclock.net banner

CPU Multiplier dropping to 4X under load?

1906 Views 13 Replies 9 Participants Last post by  Lagpirate

I was running prime 95 and cpu-z then after a while the cpu multiplier and voltage dropped to 4X (800MHz) and 1.1V. it did this briefly a few times at first them it basically stayed at these settings, because of that I put it down to heat. at that point the cpu was at 49C. Before any asks, I have AMD cool n quiet disabled.

How can I stop this from happening, any setting in the BIOS?


1 - 1 of 1 Posts

· Registered
3,113 Posts
Go to control panel, system & security, power options, select high performance.

It should fix your problem, and stay at the normal clocks.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.