[sretupmocx]

My cpu temp. goes up to 59C
i didnt overclock my pc
i just running it nearly 24 hours
i used default amd cpu cooler (it look sucks)
should i buy new cpu cooler??
did u think cooler master aero 7+(now its cool) is enough??
my budget is low....

 

[tubnotub1]

Try reseating the HSF before purchasing a new cooler. Also, make sure you are using something like AS5.

 

[ENTERPRISE]

Well your CPU is prone to getting warm due to its fabrication type. However. You shouldnt get that hot. Perhaps try removing your heatsink and cleaning off the old thermal compound and reapplying a better one such as AS5 ( Arctic silver 5 ) and then replace the heatsink.

 

[sretupmocx]

what is the normal range for amd cpu temp??

 

[PROBN4LYFE]

Quote:

Originally Posted by sretupmocx My cpu temp. goes up to 59C i didnt overclock my pc i just running it nearly 24 hours i used default amd cpu cooler (it look sucks) should i buy new cpu cooler?? did u think cooler master aero 7+(now its cool) is enough?? my budget is low....

Hell yes...I have an Aero 7 Lite and it is really cool

!
Might wanna check for a BIOS update

 

[sretupmocx]

good, the stupid post have gone...
now...can anyone tell me the normal temp for amd cpu???
i just reach 63C
HELP im worried

 

[beret9987]

Can't give you a normal temp but 63C is HOT! Shut it down! Reseat! Apply some AS5! Something!

 

[sretupmocx]

can master cooler aero 7+ give a significant changes in the cpu temp??

 

[Xavier1421]

Pretty significant, but it needs to be making proper contact.

http://www.overclockersclub.com/revi...aero7lite4.php

If the temp is truly in the mid-upper 50's, then it is most likely not seated properly.

 

[exad]

My 2500+ runs lower than 50c overclocked so I would strongly suggest first trying to reaply some thermal compound. Arctic Silver 5 is good stuff. Also, I would suggest checking your bios for temps or trying another temp monitoring program. Perhaps yours is faulty. I think My PC auto shuts down at around 60c. If the temps are indeed that high and the thermal compound doesn't work, you can maybe try lapping your current HS, maybe it's scratched or something. If it's not scratched and thermal compound doesn't work then I would suggest buying a new HSF. If you don't plan to overclock, I think most brands should be efficient enough to bring your temps down.

 

[gonX]

Those CPUs get quite toasty. You could happen to have a 1.65v version of that chip. Try knocking it down to 1.6v.

 

[Xavier1421]

Quote:

Originally Posted by exad My 2500+ runs lower than 50c overclocked so I would strongly suggest first trying to reaply some thermal compound. Arctic Silver 5 is good stuff. Also, I would suggest checking your bios for temps or trying another temp monitoring program. Perhaps yours is faulty. I think My PC auto shuts down at around 60c. If the temps are indeed that high and the thermal compound doesn't work, you can maybe try lapping your current HS, maybe it's scratched or something. If it's not scratched and thermal compound doesn't work then I would suggest buying a new HSF. If you don't plan to overclock, I think most brands should be efficient enough to bring your temps down.

The aero 7 would be more along the lines of today's arctic freezer (non pro), quiet and effective. The volcano was a beast of a HSF...so sub 50 temps is not a surprise in the least

The socket A's are easier to install a temp probe on as well, you might want to pick up an inexpensive thermal monitor for one of your drive bays to make sure you have a better idea of the temps.

 

[The Duke]

I use to have the same MB as you and it OC great

Mine had a 2600m with a Volcano 12, a bit loud at full speed but a very good cooler for that MB because you have to have clips to retain it on that MB!
A few places for about $30
http://castle.pricewatch.com/s/search.asp?s=Volcano+12
$33
http://www.newegg.com/Product/Produc...82E16835106035
If you want to go a bit les expensive ...
http://www.newegg.com/Product/Produc...82E16835106038

Note peeps, his MB does not have mount holes, must have a clip on HSF.

 

[riddler2k6]

ok did u plug the cpu fan into the mobo ?
and if u used to cheap cr*p that came with the cooler replace it

 

[digitalh3lix]

my c2d runs that hot at 100% full load on stock cooling. but it never hits 100% load unless its stress testing. mine idles around 41ish @ no load

 

[exad]

Quote:

Originally Posted by The Duke I use to have the same MB as you and it OC great Mine had a 2600m with a Volcano 12, a bit loud at full speed but a very good cooler for that MB because you have to have clips to retain it on that MB! A few places for about $30 http://castle.pricewatch.com/s/search.asp?s=Volcano+12 $33 http://www.newegg.com/Product/Produc...82E16835106035 If you want to go a bit les expensive ... http://www.newegg.com/Product/Produc...82E16835106038 Note peeps, his MB does not have mount holes, must have a clip on HSF.

A bit loud? When my Volcano 12's cranked up it sounds like a jet engine is firing up.