Overclock.net banner
1 - 20 of 476 Posts

·
Registered
Joined
·
723 Posts
Discussion Starter · #1 ·
Specs:
- screens: main 1x N150U3-L06 (DD-IPS) + sides 2x IDTECH ITUX97E (TN) (each 1600x1200 UXGA)
- total res - 3600x1600 - 20,25 : 1 ratio (almost 21:9)
- controllers - universal from ebay x3
- screen area dimensions (with middle bezels) 714x307mm (for compare dell U2913WM ~673x284mm)
- total dimensions 724x320mm (dell U2913WM - 700x317mm)
- power consumption - 30W (powered by 12V - brick or just from PSU molex) like that LCD connected via 12V molex





2x15 + 23" eizo










I am waiting for third controller for lcd and thats it
wink.gif
 

·
Premium Member
Joined
·
8,166 Posts
This is awesome
drool.gif

Great little piece of engineering.
 

·
Registered
Joined
·
965 Posts
I am so doing this. That is fantastic! As Awaz said, can you share the model number of the controller? I am having trouble finding one.

Wow... just wow. $250 for a higher res than $1000 will get you from Dell.
 

·
Registered
Joined
·
1,331 Posts
amazon.com is where i get a lot of laptop lcd replacements when i fix random peoples broke junk
you tend to spend around 70 - 120 for a 17"
never even dawned on me to make my own monitor out of them.
following this thread like a stalker!
 

·
Premium Member
Joined
·
18,369 Posts
nice work wonder if thiers anyway to remove the bezels to make it look exacty like 1 lcd if you could you probly could sell these on ebay for a good amount.
 

·
Registered
Joined
·
87 Posts
beautifull. i feel this is how the future should go for consumers. i would pay an extra 20 percent just to be able to totally customize my setup and mix and match.

glossy matte height adjust size ratio dpi tn va ips backlight strobing ...etc to each his own. next monitor i'm looking to do some DIY as well. hope i dont get lazy
 

·
Ncase M1 Lover
Joined
·
1,431 Posts
1 - 20 of 476 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top