Overclock.net banner

1 - 1 of 1 Posts

17 Posts
Discussion Starter #1

I have just bought this pump from ekwb

The motors are these ones on both sides of https://www.ekwb.com/shop/ek-d5-pwm-motor-12v-dc-pwm-pump-motor

The problem is I found out one of the motors cable (the pwm cable [the blue and green cables]) is not connected to the mainboard inside the pump.

So wanted to ask is it safe to use it or should I try to RMA it, or should I solder it myself (I have never soldered any electronic before though)

The problem is on one side only the other side's pump cable are perfectly fine
1 - 1 of 1 Posts