Overclock.net banner

1 - 9 of 9 Posts

·
Registered
Joined
·
2,397 Posts
Discussion Starter #1
.sorry if i got this thread in the wrong category.

i own a ASUS P5N32-E SLI motherboard . but i only got 1 stick of ddr2 667MHZ memory..

now i ordered another stick of ddr2 667MHZ memory ...

the point is will my system work with memory from two different companies .

PNY TECHNOLOGIES AND kingston MEMORY.

just wont to know if there will both work together in the same system
 

·
Registered
Joined
·
2,397 Posts
Discussion Starter #3
Quote:

Originally Posted by lanky View Post
They should work fine together, timings may need to be changed,but otherwise, it should be fine.
ye thanks its not much fun playing big games with only 1 stick ram ..thanks rep
 

·
Registered
Joined
·
2,397 Posts
Discussion Starter #5
Quote:

Originally Posted by alexisd View Post
Yes it work.And timmings,volts have to be change in bios.
so what do i have to do to get them to work ok
 

·
Registered
Joined
·
1,846 Posts
Quote:

Originally Posted by nigel View Post
so what do i have to do to get them to work ok
I think sometimes as mentioned above, timings need to be changed in the Blue Screen ( bios) which you can access at startup. I am not sure about voltages though.
 

·
Registered
Joined
·
2,397 Posts
Discussion Starter #8
Quote:

Originally Posted by alexis View Post
Here is the guide for our board.You need to set your, timings and volts manually in bios.http://www.overclock.net/intel-mothe...ing-guide.html
i think 1 thing i will do is reset the bios and then go from there .my memory is overclocked anyway so i need to reset ..i mean i got a E4300 running at 3.00GHZ lol
 
1 - 9 of 9 Posts
Top