Overclock.net banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
1,331 Posts
Discussion Starter #1
Hi all

I recently added a 512MB that was lying around to my system, this module is rated at 667MHz and my 2GB module is rated at 800MHz. I currently have the lot running at 833MHz at 5-5-5-15 timings with 2.02v.
Attachment 176303
What do you guys think I should do? Take out the 512MB module and have the 2GB running at higher speeds or keep both modules and try to squeeze more MHz out of them.

EDIT: How many more MHz do you guys reckon I cold get out of this RAM if I raised the tRAS to say 20-24?
LL
 

·
Premium Member
Joined
·
5,241 Posts
take out the 1/2 GB ram, probably not helping much, the speed will do more than 1/2 GB, plus if you get another 2GB module you can run it in dual chanel mode
 

·
Premium Member
Joined
·
4,914 Posts
in my experience, cas 6 really doesnt help, and caused my board to act weirdly.

cas 5-5-5-18-60 2T got me to 1100 easy on an 800 kit. (rated for cas 4 @ 800)
 
1 - 4 of 4 Posts
Top