Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
Hello i have a 3930 i suspect to be dead.
so to explain:
my computer run fine before but one day i wanted to power on my computer and my MB(ASRock x79 Champion) show D6 on the debug Led which is the first debug code shown usually.
But then it stay like this and never changes, first i thought it was my ram but i remember that in that case it would either show D7 or D9
Usually when there is a problem related to the cpu its 00 but nope.
So i tried it on a second MB ( Rampage 4 extreme) now i get the code 00
I dont know if both of my board are dead of if its my 3930k
Already try CMOS, Different bios.
PSU maybe? Its an rebranded Seasonic Platinum bloc (Ldlc xt-850p)
Thanks
 

·
Not New to OCN
Joined
·
1,750 Posts
D6 looks to be VGA is unrecognized, so take that out. For good measure, I would also unplug and drives and other pci-e devices and just try to let it post with bare minimum hardware.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #3
D6 is supposed to appear after multiple debug code.
The fact is on my ASRock MB when i start it it only show D6 when i used to have 5-10 second of debug code before coming to D6 if i dont have gpu.
here it shows D6 like if the motherboard doesnt initialize
 
1 - 3 of 3 Posts
Top