Overclock.net banner

1 - 7 of 7 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter #1
Hi Guys,

Just wondering if anyone you what the "normal" voltages are for the Gigabyte GA-X48-DS4? The voltages I'm wanting to know are the following

DDR2 Overvoltage Control
PCI-E Overvoltage Control
FSB Overvoltage Control
(G)MCH Overvoltage Control

If anyone knows these or where to find them it would be greatly appericated
 

·
Registered
Joined
·
64 Posts
Discussion Starter #3
Hmmm I'm pretty sure it just says "auto" next to the option in the bios but I'll just restart and double check to be safe.
 

·
Premium Member
Joined
·
18,611 Posts
Usually it says "auto" but also what the auto voltage is, IE the stock voltage... or at least it does on my UD3R.
 

·
Overclocker
Joined
·
867 Posts
Okay the Default voltage for DDR2ram is 1.8v the SPD tab in CPUZ will tell you what voltage your ram is rated for then adjust it accordingly the board will set the voltage to 1.8v on normal so you add +3 if your ram is 2.1v
 

·
Registered
Joined
·
64 Posts
Discussion Starter #7
I had a feeling the default voltage for the ram was 1.8v. I looked up my ram on the G Skill website and found its voltage range is 1.8v - 2.1v. So that is all good, Just need to work out the other three default voltages now.
 
1 - 7 of 7 Posts
Top