Overclock.net banner

1 - 4 of 4 Posts

·
Registered
Joined
·
361 Posts
Discussion Starter #1
Hey,

I have the 3200mhz ddr4 2x8 gskill ram kit currently and was wondering if I got another set that it would work fine?

I have the ASUS Z170-AR motherboard.

This is the RAM:

- DDR4 3200MHz Memory Black F4-3200C16D-16GVK

- G.Skill Ripjaws V F4-3200C16D-16GVKB 16GB Kit (8Gx2) --- This one has a B at the end ?

here are the links for the two different rams:

http://www.msy.com.au/saonline/memory/16195--gskill-ripjaws-v-f4-3200c16d-16gvkb-16gb-kit-8gx2-ddr4-3200-desktop-ram.html

http://www.mwave.com.au/product/gskill-ripjaws-v-16gb-2x8gb-ddr4-3200mhz-memory-black-f43200c16d16gvk-ab65445

From what I can see the timings are different?

+rep for answer
thumb.gif


Cheers,

Jordan
 

·
Registered
Joined
·
361 Posts
Discussion Starter #3
Anyone ? I done some research and it looks like it and the fastrr ram will just run at the slower tining ?
 

·
Registered
Joined
·
1,377 Posts
It's not a guarantee they will run at rated speed but it will work.

They may run together at the rated speed of the highest latency set but Dimms are only guaranteed to run at rates speeds under each kits conditions and combining kits and especially different latencies you can't be sure. Ideally when adding RAM you replace the entire kit with a new one of the amount you want if you're looking for guaranteed speeds.
 
1 - 4 of 4 Posts
Top