Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
319 Posts
Discussion Starter #1
Alrighty, I recently bought new PC parts with your guys recommendation.

I just ran to a problem when installing/assembling - the computer will not boot.

When I plugin the 2x12 Main power Connection and 2x4 12V power connector, the computer does not boot, the fans dont power on - nothing happens.

However for somereason when I unplug the 2x4 12v Power connector and try powering on the pc - The CPU/graphic card/PC fans/LEDs power on (no devices ie HDD).

What is the problem here? Is my PSU bad/weak? I am using a 500W PSU, here are my PC parts I bought from Newegg:
  • HD 500G|SEAGATE ST3500418AS
  • MEM 2Gx2|A-DATA AX3U1333GB2G8-AG
  • MB GIGABYTE | GA-770TA-UD3 770
  • CPU AMD|PH II X2 555 3.2G AM3 C3
  • VGA XFX|HD-577X-ZNFC HD5770

    [*]PSU OCZ|OCZ500MXSP 500W
  • CASE ROSEWILL | BLACKBONE
  • DVD BURNER LG | GH24NS50
 

·
Premium Member
Joined
·
6,318 Posts
Will an AM3 chip work on an AM2+ board?
 
1 - 3 of 3 Posts
Top