[SANNIN3Xjima]

Quote:

Originally Posted by blackjack23 it's all about the flatness and contact between the IHS and the HSF, it doesn't need to be a mirror finish, unless you want the flash noone will see

I was thinking the same. Just wanted to make sure. Since I'm going to use at least a day to make my results. I was thinking about modding the washer mod itself.

So I'll have to wait until spring break to do that.

As for the sand paper, can you reuse it? or do you need new ones?

 

[SANNIN3Xjima]

Quote:

Originally Posted by Boxy_The_Box When you check the flatness, let us know. Curious on how flat their lap jobs are.

Sure I'll let you know. But I've read from a lot of people they do a decent job. I forgot about checking it so it was my negligence.

You guys reuse the sand paper though??

Quote:

Originally Posted by XFreeRollerX I purchased a pre-lapped TRUE from CRAZYPC.com It passses the razor blade test, where you put a clean blade to it... there was zero gaps on either side. The thing was 100% flat. It even made a flat footprint of ink on my marble table, that was also machined flat. CrazyPC does a flawless job of lapping the Heatsinks. I think you are fine and shouldnt bother touching it.

Thanks for the confirmation.