Overclock.net banner
1 - 8 of 8 Posts

·
Registered
Joined
·
478 Posts
Quote:
Originally Posted by writer21 View Post

Also is it safe if I don't use memory core voltage. I'm not sure but I heard these cards don't have anything to cool down the ram.
+90 vcore, ram voltage and aux voltage max since launch - still going strong!
 

·
Registered
Joined
·
1,746 Posts
For my card, there's no reason to max out the mem and aux...except in Far Cry 3...while I must raise the offset voltage on the mem into +10mV
 

·
Registered
Joined
·
478 Posts
Quote:
Originally Posted by writer21 View Post

Only +90? Why not +100mV. Do you throttle at around 102% as well? Also what are you clock speeds and voltage.
Cause i see no benefit in going to +100. These cards have a broken bios, i am running a heavily modified Galaxy bios
smile.gif
 

·
Registered
Joined
·
760 Posts
Discussion Starter · #7 ·
Quote:
Originally Posted by iRandomize View Post

Cause i see no benefit in going to +100. These cards have a broken bios, i am running a heavily modified Galaxy bios
smile.gif
Ahh okay... Just wondering because I can't even reach the max 114% power limit I set in afterburner. It throttles at around 102%. Seems I have some power that is missing that could get me more stable but can't even get near it.

So I would probably have to mod my bios or use another to fix the issue?
 

·
Registered
Joined
·
478 Posts
Quote:
Originally Posted by writer21 View Post

Ahh okay... Just wondering because I can't even reach the max 114% power limit I set in afterburner. It throttles at around 102%. Seems I have some power that is missing that could get me more stable but can't even get near it.

So I would probably have to mod my bios or use another to fix the issue?
Modding the original BIOS doesen't fix the throttling issue. You will have to use a heavily modified bios to fix the issue. I will upload it for you, when I get to my computer again.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top