[badatgames18]

I am not sure if my overclocked dims are better off where they are or whether i should have left them at their factory settings (9-9-9-24 1T 1600mhz). Here is a memory bench... is it any better than what i would have gotten with my factory specs? I am assuming lower numbers are better????

thanks. Pic is a little small so i am running them at 9-11-9-27 1T at 1872mhz.

How does this compare? good? or bad?

 

[landyzhu]

Quote:

Originally Posted by badatgames18 I am not sure if my overclocked dims are better off where they are or whether i should have left them at their factory settings (9-9-9-24 1T 1600mhz). Here is a memory bench... is it any better than what i would have gotten with my factory specs? I am assuming lower numbers are better???? thanks. Pic is a little small so i am running them at 9-11-9-27 1T at 1872mhz. How does this compare? good? or bad?

you should see this, let me know if you still have question

 

[badatgames18]

your running 2129? how did you get the memory latency so low... did you do that bench with the memory in your sig rig?

 

[Blameless]

Quote:

Originally Posted by badatgames18;12980006
Here is a memory bench... is it any better than what i would have gotten with my factory specs?

In all probability it is.

Run the same test with both settings to confirm.
Quote:

Originally Posted by badatgames18;12980006
I am assuming lower numbers are better????

Higher bandwidth, measured in MB/s or GB/s, is better.

Lower latency, measured in nanoseconds, is better.
Quote:

Originally Posted by landyzhu;12981183
you should see this, let me know if you still have question

He's using MaxxMem so he's obviously not going to get an Everest/ADIA bench window.
Quote:

Originally Posted by badatgames18;12981206
your running 2129? how did you get the memory latency so low... did you do that bench with the memory in your sig rig?

He's running his memory noticeably faster, with tighter timings, and has a higher CPU speed.

It's also a different test.

 

[landyzhu]

Quote:

Originally Posted by badatgames18 your running 2129? how did you get the memory latency so low... did you do that bench with the memory in your sig rig?

go for 2gbx4

 

[Mr.Eiht]

Maybe you hop over there and have a "luke"
http://www.overclock.net/intel-memory/553039-maxxmem-benchmark-results-thread.html
May the force be with you!