Overclock.net banner

don't understand!

392 Views 9 Replies 4 Participants Last post by  kenny1064
I am having a problem with my memory. my fsb was set at 270x9 htx4 which put my mem at ddr540. It ran memtest for 6 hrs with no problems. Then i ran memtest again about a month later and it showed errors at the end of test 5. I was going to attempt to get lower timings, but this just ruined that idea. can anyone help?
1 - 10 of 10 Posts
try dropping your HT to 3
  • Rep+
Reactions: 1
Quote:


Originally Posted by busa

try dropping your HT to 3



Good advice.
See less See more
does this mean that i've hit my peak. if thats so then i am disappointed with this memory.
Quote:


Originally Posted by kenny1064

does this mean that i've hit my peak. if thats so then i am disappointed with this memory.

It's not really that. Your HT bus is way over 1000. Dropping your HT to 3 will get it under 1000 again and hopefully get you some stability.
See less See more
appreciate that, guys!
See less See more
No problem...see us intel guys aren't all bad.
See less See more
Quote:


Originally Posted by busa

No problem...see us intel guys aren't all bad.


Yeah, but those AMD guys, I just don't know.
See less See more
2
Don't feel too bad at least your ram can get 270, I can't break 260 with mine... I had really hoped for a little bit more than 260...
See less See more
with my 1gb dual channel ocz el platinum i got 295. maybe i should have stuck with 2gb of ocz.
See less See more
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top