Overclock.net banner

1 - 4 of 4 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter · #1 ·
So, I've backed myself into a corner case-wise on my first build. Rookie mistake, I know, but I'm a rookie
(If you must know why, check my old thread here :

"http://www.overclock.net/intel-gener...ld-doable.html)

To make a long story short, I'm weighing my cooling options on a new i7 2600k (slightly overclocked, nothing insane) build that can't fit a top performing air cooler. I know there are a bunch of different ones out there but, in your opinion, is there any dual (or triple, though I haven't seen one) 92mm fan radiator that would be worth using instead of top down air, or should I just save the custom water for the next project I am sure to do?
 

·
Premium Member
Joined
·
5,945 Posts
You'll be fine as long as you put some half decent fans on it.

Personally I would get the XSPC RS360 kit and mount the radiator out the back of the case. Throw the GPUs into the loop as well, slap some gentle typhoons on the radiator and get 50C load across the board while having a VERY quiet setup.
 
1 - 4 of 4 Posts
Top