Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello everyone,

I am trying to overclock my E2140 1.6GHz running on MSI 945GCM5-L V2 to as much as possible, I saw on the internet people getting 3.2GHz!

The maximum I got was around 2.13GHz, the settings were:
CPU Frequency FSB: 266 (Default was 200)
Memory Voltage: 2.15 (the default was 1.9 and it was automatically changed once I changed the CPU FSB to 266)
PCI Express voltage: 1.55
Spread Spectrum Disabled

When I tried to increase the FSB above 266, the computer wouldn't boot up, even when I increased the MEM and PCI voltage it didn't help.
When I increased the MEM and PCI voltage to maximum possible it would still boot up and work as long as the FSB was less then 266 therefore I was limited to around 2.13GHz.
The CPU temp were around 30c at all times.

Any idea how can I get more juice out of this old peace of hardware?


Thanks!
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
I couldn't find that anywhere.
Attached a screenshot of the bios

EDIT:
I am also looking at this screen on my computer the this line is missing:
"Adjust CPU Ratio 15"
Its just missing, not there.
Any ideas?

 
1 - 3 of 3 Posts
Top