E5200 on DS3L HELP!!!!!

Theses chips are known for having fsb walls @ 300 and above

but what kind of voltage have you tried ?

mine would only run up to like 320.

I would be happy with 300. I think i went all the way up to 1.38XX on the cpu and everything else .1 over

ttt

please fill in your system specs on user CP

because i see no system specs , i'm gonna blindly recommend that you bump the northbridge volts .1 or .2 volts up and memory volts to around 2.1 -2.2.

do not do this until i see your system specs.

go to quick links>user control panel>add system and fill out as much as you can

OK Guys I Got it

my problem was simple I just overlooked it. I needed to lower the Multiplier..

I set the Voltage at 3.8XX
Ram at 2.5
all overvoltages .1
Bus speed 333
Multi at 10

Ok, cool. Was about to suggest jumping past 300, because my own e5200 has an FSB hole at 307. No matter what I do I can't post at 307 :/ I can go over that though!

I got 300 and jumped to 333 and it worked haha. then I tried 350 no luck it posted but restarted loading the OS. I'll push it in the future the temp wont go past 45C

What did you set to 3.8V, the MCH Core? Also check the specs on your RAM to make sure 2.5V isnt a little to aggressive.

um, 3.8v? That will kill something. Instantly. Most e5200's have a wall around 333. If it can't get past 300 there's something wrong with it.

so back it down eh?

MCH was increased .1

it was voltage control that i changed that high lookin at the 5X00 thread. I backed it down to 1.34XX and im sorry it was at 1.38

Maybe start at like 1.3V and try to find your FSB wall. MCH should be good there. Also check the specs on your RAM for timing and voltage

ok will do.

My chip is FSB limited as well, I have hit 304 with a lower multi and 1.325Vcore, Also I disabled Vdroop and C1E. I dropped it down to [email protected] to gain a higher and more stable OC.

Here is what mine is running @, 100% stable, 41c idle, 60 load, this should give you an idea:

http://valid.canardpc.com/show_oc.php?id=859806

I plan on lapping the CPU/AC7 to maximize my cooling and hopefully it will allow me to push my FSB a little more.