Overclock.net banner

1 - 4 of 4 Posts

·
Registered
Joined
·
102 Posts
Discussion Starter #1
I want to switch away from my dangerden monsoon bay res and put both of my D5 pumps into serial action.

With that said, I want to make sure that I have all the necessary parts.

I want to use the Dual D5 pump top and add a tube res ontop of it.

Could you guys double check me ?

EK D5 Dual CSQ Pump Top

EK D5 X-RES Top 140

Would I also need this piece to link the tube res to the dual d5 pump top?

EK-Dual D5 X-Res Link

Thanks in advance.
 

·
Premium Member
Joined
·
4,140 Posts
They are two separate pump tops you have there, the dual top and single top with built in res.

To put a tube on the dual top you need the adaptor you linked and just a tube and tube cover.

http://www.ekwb.com/shop/pumps-and-accessories/pump-tops/ek-d5-dual-top-g1-4-csq-black-acetal.html
http://www.ekwb.com/shop/pumps-and-accessories/pump-tops/ek-dual-d5-csq-x-res-link.html

You could buy an X3 res and the link replaces the bottom ... or top, as shown in the pics on frozencpu for the link adaptor.

http://www.ekwb.com/shop/reservoirs-and-acc/reservoirs/ek-res-x3-series/ek-res-x3-150.html

or just buy a tube and top seperately

http://www.ekwb.com/shop/reservoirs-and-acc/reservoir-acc/ek-res-x3-series/ek-res-x3-tube-150-104mm.html
http://www.ekwb.com/shop/ek-res-x3-top.html
 

·
Registered
Joined
·
102 Posts
Discussion Starter #3
Great thanks,

Good thing I posted up, after looking at the parts, I thought it would be a waste to get rid of the bottom part of the tube res that it comes with.
 

·
Old to Overclock.net
Joined
·
3,222 Posts
You can also use any other tube reservoir by connecting it with G1/4 fittings and tubing, or something like a male to male connector, to the EK Dual D5 Pump top.
I have mine setup with dual D5's and the EK top, connected with compression fittings through a section of tubing to my reservoir, and it works very well.
I've been very pleased with the EK D5 Dual Pump top.
thumb.gif
 
1 - 4 of 4 Posts
Top