Overclock.net banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi there,

I thought I've read that the Z270 monoblock would also fit the Z370, but it appears to be removed from the list. My question is, is it compatible or not? Looks quite the same to me, same story with the Z270I and Z370I

Hope to clarify this, since I'm planning to do an I and G build with monoblocks.

Regards,

Jacco
 

·
Premium Member
Joined
·
4,682 Posts
Quote:
Originally Posted by Fryslanboy View Post

Hi there,

I thought I've read that the Z270 monoblock would also fit the Z370, but it appears to be removed from the list. My question is, is it compatible or not? Looks quite the same to me, same story with the Z270I and Z370I

Hope to clarify this, since I'm planning to do an I and G build with monoblocks.

Regards,

Jacco
I'll try to know a bit more on those 2. I know that a bunch of Z370 Asus boards were compatible with their Z270 monoblocks counterparts.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Great!

I see you've posted in another thread, the Z270I/Z370I will fit, but the inductor coils are shorter. So that's 1 off the list.

Looking forward for some confirmation for the Z370G!
 

·
Registered
Joined
·
3 Posts
Quote:
Originally Posted by akira749 View Post

I'll try to know a bit more on those 2. I know that a bunch of Z370 Asus boards were compatible with their Z270 monoblocks counterparts.
Akira,
Any news on this?
Another question in case it's a "not compatible" answer.
Does EK plan to make one waterblock for the Z370-G?

Thanks in advance.
 

·
Premium Member
Joined
·
4,682 Posts
Quote:
Originally Posted by PietroBR View Post

Akira,
Any news on this?
Another question in case it's a "not compatible" answer.
Does EK plan to make one waterblock for the Z370-G?

Thanks in advance.
I know it's not compatible but I wasn't able to know because of what exactly.

And I know we're currectly not planning on making one for it.
 

·
Registered
Joined
·
3 Posts
Quote:
Originally Posted by akira749 View Post

I know it's not compatible but I wasn't able to know because of what exactly.

And I know we're currectly not planning on making one for it.
Hey Akira,
Thanks very much for the quick reply.
For the looks of it, I think it's not compatible because of the positioning of one botton capacitor, near the CPU (I might be wrong, so don't take my word from it). All the rest looks the same, aside for this capacitor positioning.
 

·
Registered
Joined
·
41 Posts
Anyone confirm this for sure yet?
 
1 - 8 of 8 Posts
Top