[Paddyman89]

Im currently testing at 245 reference clock, Core speed is at 3.675, voltage at 1.424, bus speed 245, Ht link 1960, Dram feq set to 400, running at 490, NB feq 1960.

Chipset over voltage, memory over voltage and memory timing are all set to auto.

I run prime small ffts and I fail after like 2 minutes

Solutions?

 

[BlankThis]

Download this and make a bootable CD and just test the memory. From there we can rule memory out.

~B~

 

[Paddyman89]

aww dont have any blank cds, any other way to check if its memory?

 

[Drdeath]

Memory is prob OK. What is your CPU voltage exactly?

 

[RockingGoat]

Your memory might be high. Try upping the northbridge, should give you some more stability.

 

[Paddyman89]

Cpu voltage is at 1.45000 I have every other voltages on auto becauase I cant find any of there stock voltages

 

[Paddyman89]

Just moved my reference clock to 240 and ran prime for one hour then failed

 

[RockingGoat]

Did you try upping the NB?

 

[Drdeath]

Quote:

Originally Posted by Paddyman89 Cpu voltage is at 1.45000 I have every other voltages on auto becauase I cant find any of there stock voltages

That is low for voltage. As long as your temps stay OK like 55 or below, pump voltage up. try 1.5V. If you have a 1 hr run on prime95 you aren't far off. It needs tweaking.

Bring northbridge up to 2200-2400MHz and raise CPU/NB voltage to about 1.3V. Watch temps too.

Bring hypertranspot to 2000MHz.