Overclock.net banner
1 - 8 of 8 Posts

·
Intel Overclocker
Joined
·
266 Posts
Discussion Starter · #1 ·
I OC my 920 to 4.074 with a BCLK of 194 (21x) @ 1.3v on the MB.

RAM Clock Multiplier is set to 8 as 10 puts it too high.

This puts the RAM @ DDR3 1552 (776MHz). I was able to tighten the timings to 8-8-7-24 from the stock 9-9-9-24.

Is tightening the RAM vs having it at DDR3 1600 a fair trade? Or does it really make too much off a difference at these speeds.
 

·
Intel Overclocker
Joined
·
266 Posts
Discussion Starter · #6 ·
Thanks for the info guys
 

·
Intel Overclocker
Joined
·
266 Posts
Discussion Starter · #7 ·
Well turns out that OCCT didn't like the lowered timings.
I had to put it back to 9-9-9-24, though MemTest showed a pass.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top