Overclock.net banner

Finaly found my stability issue....

308 Views 3 Replies 4 Participants Last post by  CWell1337
Oh man... I've had this rig for a few years now, and it's never been 100% stable at 190x12.5. Well, I found my problem. Looking around in my BIOS the other day, I happened to notice that CPU-Z cited my memory timings as 3-4-8-4 instead of 3-4-4-8, where I though I had them set.

Sure enough, I get into the BIOS and my timings are 3-4-4-8, but I check the names and notice something weird. The board has timing settings in a nonh-standard order, swapping tRAS (usualy last) with tRP (usualy third).So, instead of running 3-4-4-8, I was trying to go 3-4-8-4, and the memory wasn't liking that at all.

I'm off to try to push it a little further. I'd love to break 200mhz FSB.
See less See more
1 - 4 of 4 Posts
D'oh
And you blamed the chipset for that! SHAME ON YOU!!!
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top