[Exostenza]

Had this passed on to me in the official 7950/70 thread and thought I would make it easier to find for everyone. I have having problems with Afterburner and the newest drivers where Afterburner would just show 0 for both the core and the memory and this patch (supposedly by ATIman) fixes that issue!

MSI AB PATCH

 

[Exostenza]

Bump so people can see this.

I see lots of people asking about this and here it is.

Now go OC!

Confirmed by me working on every (even betas) driver since 12.1!

 

[4514kaiser]

ty i'll give it a go since my afterburner drops all values to 0 if the cards are not under high load i even get temp readings of 0 while my second card if its not under a stress test! I'v been having tons of issues with these cards..... not all were ati's fault however

 

[Sarinaide]

Please tell me this will work, my limitations on 950 core clocks is seriously annoying.

 

[PoopaScoopa]

This works but in 12.3 there's tons of problems. Annoying black line flickering every time I watch a flash video or switch between 2D to 3D. Original thread here: http://forums.guru3d.com/showthread.php?t=359671 12.2 doesn't have these issues while using these DLLs.

 

[Sarinaide]

Finally got it to operate properly.

 

[mltms]

is this patch will turn off that ULPS ? who can i be sure its off coz i cant pass 1130 core

 

[Exostenza]

Quote:

Originally Posted by mltms

is this patch will turn off that ULPS ? who can i be sure its off coz i cant pass 1130 core

You can turn off ULPS in Afterburner's config file

 

[chia233]

Thank you! Been looking to solve this problem for a good while now , now i don't even have to disable AMD overdrive from the missing tab in CCC 12.3 to let MSI take control of my 5850s!

 

[gliggo]

Lol think I just made a post about this gonna try this and hope it works out for me using 12.3 without problems.

Sent from my iPad using Tapatalk HD

 

[gliggo]

Works

thanks a bunch !!!

Sent from my iPad using Tapatalk HD

 

[djxput]

Quote:

Originally Posted by Exostenza

Had this passed on to me in the official 7950/70 thread and thought I would make it easier to find for everyone. I have having problems with Afterburner and the newest drivers where Afterburner would just show 0 for both the core and the memory and this patch (supposedly by ATIman) fixes that issue!
MSI AB PATCH

+1 rep - thanks for this; been trying to get my trixx to work again since updating and this did it. - sorry like trixx better

 

[richie_2010]

working for my powercolor 6950 2gb after ages of tying, many thanks bud

 

[Exostenza]

Quote:

Originally Posted by djxput

+1 rep - thanks for this; been trying to get my trixx to work again since updating and this did it. - sorry like trixx better

Don't be sorry! As long as you are OCing and it is working out for you then there is nothing to be sorry about. No loyalists to AB here... whatever works.

 

[Cykososhull]

Worked flawlessly for my 5870s.

 

[Exostenza]

Should work for everyone on every driver. I'll report back in the OP if there is a driver it doesn't work with.

I guess this is the permanent solution to OCing for us AMD folks now.

 

[nicedart]

I was having a issues with the AB and CCC working together. I ended up editing CCC to increase clock rates.

I installed the final version of AB 2.2 last night and its great. No more conflicts everything is running great. Spent all last night gaming at 985Mhz. Got some great 3Dmark 11 benches in, it was a great night.

HERE is the link to the final version of MSI Afterburner 2.2

 

[Exostenza]

The final version of AB no longer needs these 2 .dll files anymore?

 

[4514kaiser]

This work well for me for a week and then i got another Bsod I seem to get them about 1-2 a week so i just decided to get ride of AB my pc proably just doesn't like AB did everthing correctly may give a new version of AB a go later and not bother with unlocking, think that was the issue on my pc not that i have any proof or bothered to test it lol

Ty anyway OP