Will work just fine like that. You can put a pump upside down if you must to get the correct flow. How it is orientated inside the case does not matter. All that matters is that it is lower and directly fed by the res.
Fixing EK pump DCP 2.2 in the case.
Hello, I d like to ask about fixing this pump. The pump has inlet - from the reservoir and OUT from where the liquid goes in my case to CPU.
Originally in the manual there is a picture where OUT hole is on top, and IN on the side.
Can I turn that pump to mount it like that?
on the Top is IN and on the side - OUT (of course i didnt change the rules of the flow in the pump, just rotated the pump). Wont be any problem for the pump to work?
Originally in the manual there is a picture where OUT hole is on top, and IN on the side.
Can I turn that pump to mount it like that?
on the Top is IN and on the side - OUT (of course i didnt change the rules of the flow in the pump, just rotated the pump). Wont be any problem for the pump to work?
1 - 2 of 2 Posts
1 - 2 of 2 Posts
