[liamstears]

Picked up a Koolance INS-FM17 as it was very cheap (£13 including frequency adater, normally they are around £38) and I was wondering where in my loop I should place it and if placement will matter?

This will be the loop:

pump/res - cpu - 360 rad - 360 rad - gpu - gpu - back to pump/res

Best positions case wise would be rather before or after the gpu's

What do you guys think?

 

[mm67]

Flow rate is same anywhere in the loop, just pick a place where it is easiest to install your meter.

 

[liamstears]

Quote:

Originally Posted by mm67;14178003
Flow rate is same anywhere in the loop, just pick a place where it is easiest to install your meter.

Ok Thanks!!

 

[Angrybutcher]

Just don't put it right after the pump. I'd be more inclined to put it near the res personally, but really put it where ever is convenient.

 

[Mysterion]

Quote:

Originally Posted by Angrybutcher;14178284
Just don't put it right after the pump. I'd be more inclined to put it near the res personally, but really put it where ever is convenient.

Yeah I'm planning to hang mine sideways on the top rad out right before the res.